How to replace the ignition lock cylinder on 2010 Chevrolet Impala?

Start by disconnecting the vehicle's negative Battery Cable before replacing the ignition switch lock cylinder. Safety requires disabling the sir system. The first step involves removing the tilt lever and Steering Wheel and steering column trim covers. Use a suitable tool to depress the lock retaining pin located through the access hole and hold it while rotating the ignition cylinder to the crank position. Move the Ignition Lock Cylinder to its run position then pull it out of the steering column. To install the Ignition Lock Cylinder simply guide the retaining pin into the access hole then push the lock cylinder into its case until the pin secures correctly. Put the Steering Wheel back in place along with the trim covers and tilt lever. Finish the sir system activation process while you reconnect the Battery Cable negative terminal.

OEM 2010 Chevrolet Impala Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2010 Chevrolet Impala Ignition Lock Cylinder
Part Number: 15794826
$79.30 MSRP: $124.22
You Save: $44.92 (37%)
Product Specifications
- Other Name: Cylinder Kit Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder; Cylinder, Ignition Switch
- Replaces: 19120038, 25756079
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15794826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Impala Ignition Lock Cylinder

With a comprehensive array of OEM 2010 Chevrolet Impala Ignition Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Ignition Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the ignition lock cylinder on 2010 Chevrolet Impala?
A: Start by disconnecting the vehicle's negative Battery Cable before replacing the ignition switch lock cylinder. Safety requires disabling the sir system. The first step involves removing the tilt lever and Steering Wheel and steering column trim covers. Use a suitable tool to depress the lock retaining pin located through the access hole and hold it while rotating the ignition cylinder to the crank position. Move the Ignition Lock Cylinder to its run position then pull it out of the steering column. To install the Ignition Lock Cylinder simply guide the retaining pin into the access hole then push the lock cylinder into its case until the pin secures correctly. Put the Steering Wheel back in place along with the trim covers and tilt lever. Finish the sir system activation process while you reconnect the Battery Cable negative terminal.

Related 2010 Chevrolet Impala Parts

Alternate Year Models

2009 Chevrolet Impala Ignition Lock Cylinder 2011 Chevrolet Impala Ignition Lock Cylinder