How to Replace the Steering Angle Sensor on 2010 Chevrolet Impala?

Replacement of Steering Angle Sensor and steering shaft lower bearing begins by removing the Steering Column. Start with dismantling the intermediate steering shaft boot followed by the steering shaft lower seal and the steering shaft lower bearing seal retainer and the steering shaft upper seal from the steering shaft. First remove the Steering Angle Sensor then extract the steering shaft lower bearing from the steering jacket assembly. Start installation by placing the steering shaft lower bearing inside the steering jacket assembly. Begin sensor installation of the Steering Angle Sensor before adding the steering shaft upper seal followed by the steering shaft lower bearing seal retainer and steering shaft lower seal and intermediate steering shaft boot to the steering shaft. Reinsert the Steering Column back into the vehicle.

OEM 2010 Chevrolet Impala Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2010 Chevrolet Impala Angle Sensor Part Number: 10336934
$238.93 MSRP: $406.76
You Save: $167.83 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Sensor
- Replaces: 10305163
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10336934
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Impala Steering Angle Sensor

With a comprehensive array of OEM 2010 Chevrolet Impala Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Steering Angle Sensor Parts and Q&A

Q: How to Replace the Steering Angle Sensor on 2010 Chevrolet Impala?
A: Replacement of Steering Angle Sensor and steering shaft lower bearing begins by removing the Steering Column. Start with dismantling the intermediate steering shaft boot followed by the steering shaft lower seal and the steering shaft lower bearing seal retainer and the steering shaft upper seal from the steering shaft. First remove the Steering Angle Sensor then extract the steering shaft lower bearing from the steering jacket assembly. Start installation by placing the steering shaft lower bearing inside the steering jacket assembly. Begin sensor installation of the Steering Angle Sensor before adding the steering shaft upper seal followed by the steering shaft lower bearing seal retainer and steering shaft lower seal and intermediate steering shaft boot to the steering shaft. Reinsert the Steering Column back into the vehicle.