How to replace the outer tie rod in the steering linkage on 2010 Chevrolet Impala?

One needs to raise and support the vehicle before starting the replacement of the outer Tie Rod in the steering linkage. Start by removing the tire and wheel assembly followed by removing the existing prevailing torque nut on the outer Tie Rod assembly while loosening the jam nut on the inner Tie Rod assembly. A wedge must be inserted next to the joint to stop seal deterioration when keeping the steering linkage attached. The tool j 24319-b should be used to detach the outer Tie Rod assembly from the knuckle before removing it from the inner Tie Rod assembly. The installation of outer Tie Rod assembly onto inner Tie Rod assembly requires no tightening of jam nut . Install the outer Tie Rod assembly to the Steering Knuckle followed by applying the prevailing torque nut on the outer Tie Rod assembly where you should tighten until it reaches 30 nm (22 lb ft) followed by an additional 120-degree rotation with an end goal of having 2 1/2 to 4 1/2 threads on display past the nylon washer. After installation of the tire and wheel assembly reduce the vehicle height by performing a front end alignment.

OEM 2010 Chevrolet Impala Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rods found

View related parts
2010 Chevrolet Impala Outer Tie Rod
Part Number: 26086579
$69.71 MSRP: $139.96
You Save: $70.25 (51%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 26045836, 89047698
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.6 x 5.4 x 3.8 inches
- Condition: New
- SKU: 26086579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Impala Inner Tie Rod
Part Number: 26021769
$110.05 MSRP: $172.40
You Save: $62.35 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 26021774
- Item Weight: 2.20 Pounds
- Item Dimensions: 19.1 x 4.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 26021769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Impala Outer Tie Rod
Part Number: 26086580
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.9 x 5.6 x 3.7 inches
- Condition: New
- SKU: 26086580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Impala Tie Rod

With a comprehensive array of OEM 2010 Chevrolet Impala Tie Rod, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Tie Rod are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Tie Rod Parts Questions & Experts Answers

Q: How to replace the outer tie rod in the steering linkage on 2010 Chevrolet Impala?
A: One needs to raise and support the vehicle before starting the replacement of the outer Tie Rod in the steering linkage. Start by removing the tire and wheel assembly followed by removing the existing prevailing torque nut on the outer Tie Rod assembly while loosening the jam nut on the inner Tie Rod assembly. A wedge must be inserted next to the joint to stop seal deterioration when keeping the steering linkage attached. The tool j 24319-b should be used to detach the outer Tie Rod assembly from the knuckle before removing it from the inner Tie Rod assembly. The installation of outer Tie Rod assembly onto inner Tie Rod assembly requires no tightening of jam nut . Install the outer Tie Rod assembly to the Steering Knuckle followed by applying the prevailing torque nut on the outer Tie Rod assembly where you should tighten until it reaches 30 nm (22 lb ft) followed by an additional 120-degree rotation with an end goal of having 2 1/2 to 4 1/2 threads on display past the nylon washer. After installation of the tire and wheel assembly reduce the vehicle height by performing a front end alignment.