How to replace the inner tie rods in the steering linkage on Chevrolet Impala?

The process of steering linkage inner Tie Rod replacement starts with steering gear extraction from the vehicle followed by inner Tie Rod inspection for contamination and rust after boot removal. Any detected contamination will require replacement of the steering gear. Seal the steering gear in a vise while avoiding adjustment of the preload settings before removing its two boots along with breathers. Secure the pipe wrench properly on the left inner Tie Rod housing while extracting the shock dampener which extends from the rack. Screw the pipe wrench onto the rack next to the left inner Tie Rod housing and attach a wrench to the flats of the same housing to turn it counterclockwise until the rack separates from the housing. The same procedure should be performed on the right inner Tie Rod housing. Professional installation of the left inner Tie Rod requires cleaning the threads first and removing previous loctite(R) then applying loctite(R) 262 to the threads before installation to the rack. A pipe wrench engaged with the rack alongside the j-34028 - inner Tie Rod wrench attached to a torque wrench enables left inner Tie Rod tightening to 100 nm (74 lb ft). Install the right inner Tie Rod after applying loctite(R) 262 to its threads then tighten it accordingly. An inspection of the fit should be conducted with a 0.25 mm gage to check the stakes on both sides of the female inner Tie Rod housings which get attached to the male rack. Reinstall the steering gear to its original position on the vehicle but only after applying both left and right shock dampeners across their appointed inner Tie Rod housing slots and attaching the steering gear boots and breather tubes.

OEM Chevrolet Impala Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Tie Rods found

View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 26086579
$69.71 MSRP: $139.96
You Save: $70.25 (51%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 26045836, 89047698
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Tie Rod End, Outer
Part Number: 26056100
$39.83 MSRP: $65.18
You Save: $25.35 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Outer Tie Rod; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 07826713, 7826713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Inner Tie Rod
Part Number: 26021769
$70.65 MSRP: $172.40
You Save: $101.75 (60%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 26021774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 84494628
$40.97 MSRP: $99.95
You Save: $58.98 (60%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 22776539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Inner Tie Rod
Part Number: 22895377
$45.82 MSRP: $78.01
You Save: $32.19 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 19418696
$80.94 MSRP: $126.79
You Save: $45.85 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26056811, 89047697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Impala | Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Inner Tie Rod
Part Number: 13332653
$47.98 MSRP: $117.08
You Save: $69.10 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 13286686
$64.67 MSRP: $110.12
You Save: $45.45 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Outer Tie Rod
Part Number: 26086580
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Tie Rod End, Inner
Part Number: 7834224
Product Specifications
- Other Name: Rod Kit, Inner Tie; Inner Tie Rod; Rod Assembly, Steering Tie Rod (Inner); Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Center Link
Part Number: 26059109
Product Specifications
- Other Name: Rod Kit, Steering Connecting; Drag Link; Rod Kit, Steering Intermediate
- Replaces: 26037685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Center Link
Part Number: 26059126
Product Specifications
- Other Name: Rod Kit, Steering Connecting; Drag Link; Rod Kit, Steering Intermediate
- Replaces: 07837639, 7837639, 26037646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Tie Rod End, Inner
Part Number: 26056098
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Outer Tie Rod End; Inner Tie Rod; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 07834234, 7834234
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Tie Rod

Our website offers an extensive catalog of genuine Chevrolet Impala Tie Rod at unbeatable prices. Every OEM Chevrolet Impala Tie Rod comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Tie Rod Parts Questions & Experts Answers

Inner Tie Rod
26021769
Q: How to replace the inner tie rods in the steering linkage on Chevrolet Impala?
A: The process of steering linkage inner Tie Rod replacement starts with steering gear extraction from the vehicle followed by inner Tie Rod inspection for contamination and rust after boot removal. Any detected contamination will require replacement of the steering gear. Seal the steering gear in a vise while avoiding adjustment of the preload settings before removing its two boots along with breathers. Secure the pipe wrench properly on the left inner Tie Rod housing while extracting the shock dampener which extends from the rack. Screw the pipe wrench onto the rack next to the left inner Tie Rod housing and attach a wrench to the flats of the same housing to turn it counterclockwise until the rack separates from the housing. The same procedure should be performed on the right inner Tie Rod housing. Professional installation of the left inner Tie Rod requires cleaning the threads first and removing previous loctite(R) then applying loctite(R) 262 to the threads before installation to the rack. A pipe wrench engaged with the rack alongside the j-34028 - inner Tie Rod wrench attached to a torque wrench enables left inner Tie Rod tightening to 100 nm (74 lb ft). Install the right inner Tie Rod after applying loctite(R) 262 to its threads then tighten it accordingly. An inspection of the fit should be conducted with a 0.25 mm gage to check the stakes on both sides of the female inner Tie Rod housings which get attached to the male rack. Reinstall the steering gear to its original position on the vehicle but only after applying both left and right shock dampeners across their appointed inner Tie Rod housing slots and attaching the steering gear boots and breather tubes.

Related Chevrolet Impala Parts

Browse Chevrolet Impala Tie Rod by Years

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1996 1995 1994 1985 1984