How to replace the Engine Coolant Temperature Sensor on 2010 GMC Savana 1500?

To change the Engine Coolant Temperature Sensor first, turn OFF the ignitions and lift the vehicle. Drain the cooler system at the level below the ECT sensor, and then lower vehicle. Seize the ECT sensor wiring from the engine cool temperature (ECT) sensor and remove the ECT sensor. If the ECT sensor is to be used more than once,seal the ECT sensor threads using sealer GM P/N 12346004 (Canadian P/N 10953480) or the equal. Install the ECT sensor and tighten to 20 Nm (15 lb ft), and connect the ECT sensor to electric connector. Finally, refill the engine coolant.

OEM 2010 GMC Savana 1500 Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2010 GMC Savana 1500 Coolant Temperature Sensor Part Number: 15326386
$24.96 MSRP: $46.88
You Save: $21.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Coolant Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor.; Temperature Sensor; Manifold Pressure Sensor; Oil Pressure Unit; Fan Switch; Other Sensors
- Replaces: 12146312, 25036979
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15326386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

2010 GMC Savana 1500 Coolant Temperature Sensor

With a comprehensive array of OEM 2010 GMC Savana 1500 Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 1500 Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Savana 1500 Coolant Temperature Sensor Parts and Q&A

Q: How to replace the Engine Coolant Temperature Sensor on 2010 GMC Savana 1500?
A: To change the Engine Coolant Temperature Sensor first, turn OFF the ignitions and lift the vehicle. Drain the cooler system at the level below the ECT sensor, and then lower vehicle. Seize the ECT sensor wiring from the engine cool temperature (ECT) sensor and remove the ECT sensor. If the ECT sensor is to be used more than once,seal the ECT sensor threads using sealer GM P/N 12346004 (Canadian P/N 10953480) or the equal. Install the ECT sensor and tighten to 20 Nm (15 lb ft), and connect the ECT sensor to electric connector. Finally, refill the engine coolant.