How to replace the engine oil pressure switch on 2010 GMC Yukon?

To change the engine oil pressure sensor, one is to remove the intake manifold first. Unplug the engine harness to the oil pressure sensor. Take out the sensor and washer with the J 41712. Sealant the threads of the new sensor, install the sensor and reconnect the engine harness. Lastly, replace the intake manifold.

OEM 2010 GMC Yukon Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2010 GMC Yukon Oil Pressure Sensor Part Number: 12673134
$55.41 MSRP: $94.33
You Save: $38.92 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Switch; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12621234, 12596951
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12673134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX

2010 GMC Yukon Oil Pressure Switch

With a comprehensive array of OEM 2010 GMC Yukon Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Yukon Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Yukon Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2010 GMC Yukon?
A: To change the engine oil pressure sensor, one is to remove the intake manifold first. Unplug the engine harness to the oil pressure sensor. Take out the sensor and washer with the J 41712. Sealant the threads of the new sensor, install the sensor and reconnect the engine harness. Lastly, replace the intake manifold.