How to replace the Engine Coolant Temperature Sensor on 2010 GMC Yukon?

Drain the cooling system until it falls below the Engine Coolant Temperature Sensor position before sensor replacement. Begin by detaching the engine wiring harness electrical connector from the ECT sensor then take out the sensor itself. Apply GM P/N 12346004 (Canadian P/N 10953480) or equivalent sealant to sensor threads during new or old sensor installation. Tighten the ECT sensor to a torque setting of 20 Nm (15 lb ft). Connect the engine wiring harness electrical connector back to the ECT sensor after installing the new or old sensor. Additionally, refill the cooling system. When working with the coolant sensor handle it with caution because any damage will impact the fuel control system's performance. Replacing components with the correct part numbers combined with proper torque specifications prevents harm to the system.

OEM 2010 GMC Yukon Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2010 GMC Yukon Coolant Temperature Sensor, Black Part Number: 12608814
$30.66 MSRP: $57.58
You Save: $26.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Coolant Temperature *Ite Or Black; Engine Coolant Temperature Sensor; Temperature Sensor; Temperature Sending Unit; Coolant Temperature Sensor; Engine Oil Pressure/Temperature Sensor; Computer Control Sensors
- Replaces: 15369305, 25037062, 12191170, 15326388
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 1.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2010 GMC Yukon Coolant Temperature Sensor

With a comprehensive array of OEM 2010 GMC Yukon Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Yukon Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Yukon Coolant Temperature Sensor Parts and Q&A

Q: How to replace the Engine Coolant Temperature Sensor on 2010 GMC Yukon?
A: Drain the cooling system until it falls below the Engine Coolant Temperature Sensor position before sensor replacement. Begin by detaching the engine wiring harness electrical connector from the ECT sensor then take out the sensor itself. Apply GM P/N 12346004 (Canadian P/N 10953480) or equivalent sealant to sensor threads during new or old sensor installation. Tighten the ECT sensor to a torque setting of 20 Nm (15 lb ft). Connect the engine wiring harness electrical connector back to the ECT sensor after installing the new or old sensor. Additionally, refill the cooling system. When working with the coolant sensor handle it with caution because any damage will impact the fuel control system's performance. Replacing components with the correct part numbers combined with proper torque specifications prevents harm to the system.