Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 GMC Yukon Knock Sensor

Engine Knock Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

  • 2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor - 12623730
    2010 GMC Yukon Knock Sensor Diagram - 12623730
    View related parts

    2010 GMC Yukon Knock Sensor Part Number: 12623730

    $13.47 MSRP: $25.30
    You Save: $11.83 (47%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
    • Replaces: 12570125
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 2.7 x 2.5 x 1.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12623730
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 GMC Yukon Submodels:
    • Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2010 GMC Yukon Knock Sensor

With a comprehensive array of OEM 2010 GMC Yukon Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Yukon Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Yukon Knock Sensor Parts and Q&A

  • Q: How to Replace a Knock Sensor on 2010 GMC Yukon?
    A: Vehicle owners with 4WD should start by removing the left front wheelhouse liner during Knock Sensor 1 replacement. Start by removing the left front wheel with its tire from the vehicle. Move the engine wiring harness sleeve to inside the wheel well and unplug the engine wiring harness electrical connector which connects to the knock sensor. Begin by unscrewing bolt 739 from knock sensor (718). Position the knock sensor (718) onto the engine block and tighten it to 25 Nm (18 lb ft) through the knock sensor bolt (739). Secure the knock sensor with its bolt after reattaching the engine wiring harness electrical connector to the knock sensor. Then cover the connector with the engine wiring harness sleeve. To complete the installation put back the left front wheel and tire then install the left front wheelhouse liner if it was removed.

Related 2010 GMC Yukon Parts

Alternate Year Models

+
2009 GMC Yukon Knock Sensor 2011 GMC Yukon Knock Sensor