How to replace the Brake Fluid Level Sensor in the Master Cylinder on Buick Century?

Start the replacement process of the Master Cylinder Fluid Level Sensor by disconnecting the electrical connector from the brake fluid level sensor. Operating needle nose pliers to carefully push down the retaining tabs will allow the sensor to pass through the reservoir for removal. You should insert the new brake fluid level sensor into the reservoir and activate the retaining tabs to lock it in position. To finish installation connect the electrical connector of the brake fluid level sensor.

OEM Buick Century Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
Buick Century Level Sensor
Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

Buick Century Brake Fluid Level Sensor

Our website offers an extensive catalog of genuine Buick Century Brake Fluid Level Sensor at unbeatable prices. Every OEM Buick Century Brake Fluid Level Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Century Brake Fluid Level Sensor Parts Questions & Experts Answers

Level Sensor
18012741
Q: How to replace the Brake Fluid Level Sensor in the Master Cylinder on Buick Century?
A: Start the replacement process of the Master Cylinder Fluid Level Sensor by disconnecting the electrical connector from the brake fluid level sensor. Operating needle nose pliers to carefully push down the retaining tabs will allow the sensor to pass through the reservoir for removal. You should insert the new brake fluid level sensor into the reservoir and activate the retaining tabs to lock it in position. To finish installation connect the electrical connector of the brake fluid level sensor.