How to replace the brake backing plate on Buick Century?

The process of replacing the Brake Backing Plate involves a vehicle being raised and suitably supported after which a tire and wheel assembly is removed, brake drum, and brake shoes removed. Next, you pull out universal spring and Wheel Cylinder, remove Parking Brake Cable from backing plate and Wheel Hub, and pull out rear Wheel Hub before finally taking out the backing plate. For installation remember to put the new backing plate first then the rear Wheel Hub and then reconnect Parking Brake Cable to the backing plate. Go on and install Wheel Cylinder, followed by universal spring, and brake shoes. Adjust the drum brakes, reinstall the Brake Drum, bleed the brake hydraulic system, and adjust the parking brake only to reinstall the tire and wheel assembly while lowering the vehicle.

OEM Buick Century Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Backing Plates found

View related parts
Buick Century Backing Plate, Driver Side Part Number: 25990085
Product Specifications
- Other Name: Shield-Parking Brake Actuator Splash; Brake Dust Shield; Support Plate; Shield, Parking Brake Apply
- Position: Driver Side
- Replaces: 18022582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
Buick Century Backing Plate Part Number: 18025206
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2003 Buick Century | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Century Backing Plate Part Number: 18025205
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2003 Buick Century | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Century Backing Plate, Passenger Side Part Number: 18011623
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Century | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Backing Plate, Driver Side Part Number: 18011622
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Century | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Backing Plate, Passenger Side Part Number: 25990084
Product Specifications
- Other Name: Shield, Parking Brake Apply; Brake Dust Shield; Support Plate
- Position: Passenger Side
- Replaces: 18022583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
Buick Century Backing Plate, Passenger Side Part Number: 18014505
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1992 Buick Century | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Century Backing Plate, Driver Side Part Number: 18014504
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1992 Buick Century | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Century Backing Plate, Front Passenger Side Part Number: 18011568
Product Specifications
- Other Name: Plate Assembly, Front Air Brake Backing; Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Backing Plate, Driver Side Part Number: 18011567
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL

Buick Century Brake Backing Plate

Want to cut long-term maintenance and repair costs? Choose OEM Brake Backing Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Century parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Century Brake Backing Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Backing Plate for Buick Century cars is one of the best parts which help to reduce the amount of brake dust that could stick on the wheels of the car. These plates also referred to as brake dust shields are used in a way that they channel air flow and as a consequence channel dust produced from brake pads under the car. This is a unique system that assists in ascertaining that the wheels remain clean most of the time. Common on Buick Century models are brake dust shields that are manufactured from high quality materials to ensure a perfect fit that will not hinder with other parts of the vehicle. These Brake Backing Plates are painted black and are almost concealed behind the wheels due to the matte black finish. Ease of installation is also another benefit as all that is required is to loose some lug nuts and replace the tyre. On the whole, the Brake Backing Plate improves the durability and look of the Buick Century and comes with a guarantee for extra protection.

Buick Century Brake Backing Plate Parts Questions & Experts Answers

Backing Plate
18025205
Q: How to replace the brake backing plate on Buick Century?
A:
The process of replacing the Brake Backing Plate involves a vehicle being raised and suitably supported after which a tire and wheel assembly is removed, Brake Drum, and Brake Shoes removed. Next, you pull out universal spring and Wheel Cylinder, remove Parking Brake Cable from backing plate and Wheel Hub, and pull out rear Wheel Hub before finally taking out the backing plate. For installation remember to put the new backing plate first then the rear Wheel Hub and then reconnect Parking Brake Cable to the backing plate. Go on and install Wheel Cylinder, followed by universal spring, and brake shoes. Adjust the drum brakes, reinstall the Brake Drum, bleed the brake hydraulic system, and adjust the parking brake only to reinstall the tire and wheel assembly while lowering the vehicle.