How to service the Brake Fluid Level Sensor/Switch on 2000 Buick Century?

To service the Brake Fluid Level Sensor/Switch, disconnect the electrical connector and remove the sensor using needle nose pliers to compress the locking tabs. For installation, place the sensor back until the tabs snap into place, then reconnect the electrical connector.

OEM 2000 Buick Century Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2000 Buick Century Level Sensor Part Number: 18012741
$13.39 MSRP: $25.15
You Save: $11.76 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2000 Buick Century Brake Fluid Level Sensor

With a comprehensive array of OEM 2000 Buick Century Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Century Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Century Brake Fluid Level Sensor Parts and Q&A

Q: How to service the Brake Fluid Level Sensor/Switch on 2000 Buick Century?
A: To service the Brake Fluid Level Sensor/Switch, disconnect the electrical connector and remove the sensor using needle nose pliers to compress the locking tabs. For installation, place the sensor back until the tabs snap into place, then reconnect the electrical connector.