How to Replace a Rear Brake Line on 2000 Buick Century?

The replacement of a rear brake hose starts with vehicle lift and secure support. Begin by removing the wheel and tire through the rear position but be sure to thoroughly clean dirt off all brake fittings and hoses. Use an additional wrench to gently separate the brake hose from brake pipe through the hose fitting while making sure to avoid damaging brake pipe and bracket. The brake hose requires removal of its retainer clip from the mounting bracket before extraction from the system. The brake hose bolt with accompanied hose and two washers is removed from the caliper while discarding the washers. When installing the brake system attach the brake hose bolt and hose and two new washers to caliper while lubricating threads with brake fluid until the bolt reaches 54 Nm (40 ft. lbs.). Install the brake hose into the bracket under suspension weight while avoiding kinks and align the fitting with the bracket notch by using the hose paint stripe as your reference point. Fit the retainer to the hose fitting on the bracket after using a back up wrench to join the brake pipe to the brake hose. Maintain the bracket and pipe from bending while tightening the brake pipe tube nut to 15 Nm (11 ft. lbs.). Install the rear tire and wheel while checking that the hose stays clear of all suspension components. Correct the situation if it occurs. Decrease the vehicle height and perform a brake bleeding procedure.

OEM 2000 Buick Century Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2000 Buick Century Flex Hose, Front Driver Side Part Number: 22163577
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.0 x 7.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Flex Hose, Front Part Number: 22163414
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.8 x 7.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Flex Hose, Rear Passenger Side Part Number: 22163796
Product Specifications
- Other Name: Hose Assembly-Rear Brake-Right-Hand; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.6 x 5.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Flex Hose, Driver Side Part Number: 22163797
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 16.6 x 7.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Flex Hose, Driver Side Part Number: 15876864
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 22163799
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.5 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876864
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Flex Hose, Passenger Side Part Number: 15876863
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163798
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 4.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2000 Buick Century Brake Line

With a comprehensive array of OEM 2000 Buick Century Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Century Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Century Brake Line Parts and Q&A

Q: How to Replace a Rear Brake Line on 2000 Buick Century?
A: The replacement of a rear brake hose starts with vehicle lift and secure support. Begin by removing the wheel and tire through the rear position but be sure to thoroughly clean dirt off all brake fittings and hoses. Use an additional wrench to gently separate the brake hose from brake pipe through the hose fitting while making sure to avoid damaging brake pipe and bracket. The brake hose requires removal of its retainer clip from the mounting bracket before extraction from the system. The brake hose bolt with accompanied hose and two washers is removed from the caliper while discarding the washers. When installing the brake system attach the brake hose bolt and hose and two new washers to caliper while lubricating threads with brake fluid until the bolt reaches 54 Nm (40 ft. lbs.). Install the brake hose into the bracket under suspension weight while avoiding kinks and align the fitting with the bracket notch by using the hose paint stripe as your reference point. Fit the retainer to the hose fitting on the bracket after using a back up wrench to join the brake pipe to the brake hose. Maintain the bracket and pipe from bending while tightening the brake pipe tube nut to 15 Nm (11 ft. lbs.). Install the rear tire and wheel while checking that the hose stays clear of all suspension components. Correct the situation if it occurs. Decrease the vehicle height and perform a brake bleeding procedure.