How to Replace a Rear Brake Line on a Drum Brake System on 2001 Buick Century?

You must start by raising and supporting the vehicle and then remove the rear tire and wheel assembly. Clean all dirt and foreign material from brake hoses and brake pipe fitting then secure the exposed brake pipe fitting end with a rubber cap or plug to prevent brake fluid loss and contamination. A back up wrench should be used to disconnect the brake pipes from the brake hose before fitting caps or plugs to the exposed brake pipe end. Keep the brake pipes and brackets free from bending at all times. Take out the brake hose by first removing the retaining clip from its mounting brackets . Position the new brake hose through the mounting brackets without creating bends while using the hose paint stripe to help align the fitting to the bracket notch. You should install retainer clips onto each hose fitting attachment at the bracket before using a back up wrench to connect the brake pipe to the brake hose without misaligning the bracket or pipe. To complete the installation place a new rear tire and wheel back onto the vehicle. Then lower the vehicle while checking to ensure the hose remains separated from all suspension components. Last, tighten each brake pipe fitting to 27 Nm (20 ft. lbs.). Check the hose contact points by removing the hose if any are present. Address any discovered issues. The hydraulic brake system requires a bleeding procedure.

OEM 2001 Buick Century Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2001 Buick Century Flex Hose, Front Driver Side
Part Number: 22163577
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.0 x 7.2 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2001 Buick Century Flex Hose, Front
Part Number: 22163414
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.8 x 7.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2001 Buick Century Flex Hose, Rear Passenger Side
Part Number: 22163796
Product Specifications
- Other Name: Hose Assembly-Rear Brake-Right-Hand; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 14.6 x 5.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
2001 Buick Century Flex Hose, Driver Side
Part Number: 22163797
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 16.6 x 7.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
2001 Buick Century Flex Hose, Driver Side
Part Number: 15876864
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 22163799
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.5 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876864
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2001 Buick Century Flex Hose, Passenger Side
Part Number: 15876863
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22163798
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 4.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15876863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2001 Buick Century Brake Line

With a comprehensive array of OEM 2001 Buick Century Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Century Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Century Brake Line Parts Questions & Experts Answers

Q: How to Replace a Rear Brake Line on a Drum Brake System on 2001 Buick Century?
A: You must start by raising and supporting the vehicle and then remove the rear tire and wheel assembly. Clean all dirt and foreign material from brake hoses and brake pipe fitting then secure the exposed brake pipe fitting end with a rubber cap or plug to prevent brake fluid loss and contamination. A back up wrench should be used to disconnect the brake pipes from the brake hose before fitting caps or plugs to the exposed brake pipe end. Keep the brake pipes and brackets free from bending at all times. Take out the brake hose by first removing the retaining clip from its mounting brackets . Position the new brake hose through the mounting brackets without creating bends while using the hose paint stripe to help align the fitting to the bracket notch. You should install retainer clips onto each hose fitting attachment at the bracket before using a back up wrench to connect the brake pipe to the brake hose without misaligning the bracket or pipe. To complete the installation place a new rear tire and wheel back onto the vehicle. Then lower the vehicle while checking to ensure the hose remains separated from all suspension components. Last, tighten each brake pipe fitting to 27 Nm (20 ft. lbs.). Check the hose contact points by removing the hose if any are present. Address any discovered issues. The hydraulic brake system requires a bleeding procedure.