How to replace the brake drum on 2001 Buick Century?

Start your work to replace the Brake Drum by lifting and properly positioning the vehicle under adequate support. Take off the rear wheel unit but handle everything with care to keep the splash shield and backing plate straight as damages can cause brake buzz and pulsation. Next unfasten the brake assembly. The process starts with adjusting drum brakes before installing the Brake Drum and placing the wheel set onto the rear section. Lower the car after pressing the brakes three times to let the brake shoes touch the drum.

OEM 2001 Buick Century Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2001 Buick Century Brake Drum Part Number: 88957254
Product Specifications
- Other Name: Drum, Front And Rear Wheel Brake; Drum
- Position: Rear
- Replaces: 18020817, 18022148, 18022149, 18029790
- Item Weight: 12.60 Pounds
- Item Dimensions: 13.3 x 13.2 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88957254
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Estate Wagon, Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL

2001 Buick Century Brake Drum

With a comprehensive array of OEM 2001 Buick Century Brake Drum, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Century Brake Drum are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Century Brake Drum Parts and Q&A

Q: How to replace the brake drum on 2001 Buick Century?
A: Start your work to replace the Brake Drum by lifting and properly positioning the vehicle under adequate support. Take off the rear wheel unit but handle everything with care to keep the splash shield and backing plate straight as damages can cause brake buzz and pulsation. Next unfasten the brake assembly. The process starts with adjusting drum brakes before installing the Brake Drum and placing the wheel set onto the rear section. Lower the car after pressing the brakes three times to let the brake shoes touch the drum.