Q: How to replace the power door lock switch on Buick LaCrosse?
A: The door trim panel must be first removed from the Power Door Lock Switch position followed by the electric connector removal from the door switch. A flat-bladed tool should be used to extract the lock switch from its position in the trim panel. Install a Power Door Lock Switch by inserting it into the door trim panel while connecting the electrical connector before reattaching the door trim panel.
Q: How to Remove and Install the Door Lock Switch on a Buick LeSabre?
A: The front door power door lock switch replacement starts by using a flat bladed tool to lift the switch plate from the door trim panel starting from the front edge. Moving the switch plate toward the front will let you remove the rear retainer tabs. Next disconnect any electrical connectors. Free the switch pack from the switch plate through releasing its retainer clips with an appropriate small flat bladed instrument. To reassemble the system start by placing the switchpack inside the switch plate and then connect electrical wires before inserting the switch plate edges into the door trim. Press down on the front side of the switch plate to connect the retainer clip.
Q: How to Replace a Power Door Lock Switch on Buick Regal?
A: The replacement process of the Power Door Lock Switch requires starting with removing the door handle bezel. Start by detaching the switch from the bezel with the press of the lock switch retainers. After installation you must both press the new door lock switch into the door handle bezel and reinstall the door handle bezel.