Other Name: Relay, Windshield Washer Pump; Multi Purpose Relay; Relay, Engine Air Cooling(Electrical); Relay, Emission Control System; Relay, Voltage And Glow Plug
Fits the following Buick Models:
LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Other Name: Relay, Main Wiring Junction And Fuse Block; Multi Purpose Relay; Relay, Engine Air Cooling(Electrical); Relay, Voltage And Glow Plug; Relay, Engine Vacuum Pump
Fits the following Buick Models:
LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Other Name: Relay Assembly, Stop Lamp Switch *Light Gray; Multi Purpose Relay; ABS Relay; Relay; Relay, Air Suspension And Inflator Unit; Relay, Voltage And Glow Plug
Replaces: 12135010, 12193605
Fits the following Buick Models:
Century | 1997-1999 | Custom, Limited | 6 Cyl 3.1 L GAS
Regal | 1997-1999 | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
Rendezvous | 2003-2006 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Skylark | 1994-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Other Name: Relay, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Relay; Relay: Trans Oil Pump, Eng Air Cooling(Elec), Headlamp Washer/Wiper, Voltage & Glow Plug, Eng Vacuum Pump, Starter Motor
Replaces: 13500119
Fits the following Buick Models:
LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Regal | 2011-2017 | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
Q: How to replace the power distribution relay within an electrical center on Buick Lucerne?
A: The first step to replace a power distribution relay requires removing the electrical center cover but locating the relay while observing its orientation then securing the electrical center before and after the replacement. The J 43244 Relay Puller Pliers (J 43244) should be placed against opposing relay corners before extracting it straight through the electrical center terminals because pliers and flat-bladed tools may damage the electrical center. Place the new relay into the same opening from which you removed the original device followed by the installation of the electrical center cover.
Q: How to replace the power distribution relay within the electrical center on Buick LaCrosse?
A: The first step for exchanging the power distribution relay inside the electrical center begins with removing the electrical center cover. Identify the relay while noting its correct position before securely placing the electrical center to avoid wire or terminal strain. Use the Relay Puller Pliers (J 43244) to position it across opposite corners of the relay before using the tool to draw the relay directly out from electrical center terminals since pliers or flat-bladed tools could potentially harm the electrical center. After removing the relay you must place the new one at the same spot while reinstalling the electrical center cover.
Q: How to replace the Power Distribution Relay attached to the wire harness on Buick Terraza?
A: Starting the Power Distribution Relay replacement process requires one to use the Master Electrical Component List for relay localization. Use appropriate tools to remove fastening components from the relay while also removing all Connector Position Assurance (CPA) devices and secondary locks. Carefully disconnect the relay from its position connecting to the wire harness terminals. To install the relay reattach it to the wire harness connector then replace any CPA devices and secondary locks before using the original fasteners or tape for mounting.