Q: How to Service and Repair the Turn Signal Flasher on Buick Century?
A: You need to remove three parts in order to replace the hazard and turn signal flasher: take out the left instrument panel insulator, detach the steering column filler panel and the I/P driver knee bolster bracket. Press the hazard and turn signal flasher to the side until it escapes from the BCM bracket tracks before unplugging the electrical connector. First connect the electrical connector to the hazard and signal flasher, place the flasher unit on the BCM bracket, and push it to the left until flasher tabs fit the holding slots. Reinstall the I/P driver knee bolster bracket plus the steering column filler panel and left I/P insulator in their original positions.
Q: How to service the turn signal flasher on Buick Regal?
A: Start service of the turn signal flasher by removing both the LH instrument panel insulator and steering column tiller panel. Press the signal turn hazard button while moving it to the right. This free the flasher tabs from slots on BCM bracket while disconnecting its electrical connector. Place the hazard and turn signal flasher electricity plug into place and push the flasher to the BCM bracket. Swing the flasher to the left until the tabs insert into their slots for secure installation. Reinsert the steering column filler panel as you add back the LH IP insulator.