Make sure this part fits

GM 19116962
Fuel Pump Relay, Black

2006-2024 GM

Customer Questions & Expert Answers (17)
GM 19116962 Fuel Pump Relay, Black
GM 19116962 Fuel Pump Relay, Black
  • Part Description
    Relay, Air Conditioner Electrical; Multi Purpose Relay; Fog Light Relay
  • Replaced By
    13500113
  • Manufacturer
    General Motors
Make sure this part fits
$8.18 MSRP: $15.36
You Save: $7.18 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19116962
    Part DescriptionRelay, Air Conditioner Electrical; Multi Purpose Relay; Fog Light Relay
    Other NamesFan Relay; Horn Relay; Compressor Relay; Relay
    Item Dimensions2.0 x 1.2 x 0.8 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19116962
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2024 Buick EnclaveAvenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium6 Cyl 3.6 L GAS
    2021-2023 Buick EnvisionAvenir, Essence, Preferred4 Cyl 2.0 L GAS
    2008-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2008-2016 Cadillac CTSBase, Luxury, Performance, Premium, V, Vsport, Vsport Premium4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2021-2023, 2007-2014 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V6 Cyl 3.0 L DIESEL, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2021-2023, 2007-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2010-2016 Cadillac SRXBase, Luxury, Performance, Premium6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2009-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2019-2023 Cadillac XT4Luxury, Premium Luxury, Sport4 Cyl 2.0 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 19116962 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19116962 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on Cadillac CTS? Posted by Customer
    A:
    Users can find the Power Distribution Relay position through the Master Electrical Component List. Following this discovery users must play the relay from its wire harness base. The first step is to remove all fasteners which attach the relay before unfastening any connector position assurance (CPA) devices or secondary locks while being cautious to protect the relay and wire harness connection points if the relay is secured by fasteners or tape. Behind the wire harness connector you should separate the relay. Then connect the new relay to this same connector after which you need to reinstall everything as it was before along with CPA devices and secondary locks before tightening the relay with its original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the hazard and turn signal flasher on Cadillac STS? Posted by Customer
    A:
    The first step for hazard and turn signal flasher replacement involves removing the driver side instrument panel (I/P) closeout/insulator panel. Begin by detaching the flasher module from its I/P carrier mount before disconnecting the electrical connector . Attach the electrical connector to the flasher module while following installation steps with the flasher module retaining clip installed onto the I/P carrier before returning the driver side I/P closeout/insulator panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the old relay for the 2008 Buick Enclave? Posted by Customer
    A:
    Install the new relay in the same position as the one removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you locate the Power Distribution Relay for the 2008 Buick Lucerne? Posted by Customer
    A:
    Use the Master Electrical Component List for guidance on its position in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What do you do after detaching the relay from the wiring harness for the 2008 Cadillac CTS? Posted by Customer
    A:
    Connect the new relay to the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after removing the old relay for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the new relay in the same position as the removed one.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be exercised when detaching the relay for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Exercise caution when detaching the relay from the wire harness connector, especially if it is secured by fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step for installation of the new flasher module for the 2010 Cadillac STS? Posted by Customer
    A:
    Connect the electrical connector to the flasher module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    Q:
    What is the process for installing the new relay for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the relay back to the wire harness connector, ensuring to reinstall any CPA devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should you do before removing the relay for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Remove any fasteners securing the relay and detach any connector position assurance (CPA) devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should you take care to detach when removing the relay for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    Detach any connector position assurance (CPA) devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step to replace the Power Distribution Relay for the 2007 GMC Acadia? Posted by Customer
    A:
    First, locate the relay and remove any fasteners securing it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the next step after detaching the relay for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Next, separate the relay from the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after connecting the relay for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall any CPA devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the process for installing the new relay for the 2010 GMC Terrain? Posted by Customer
    A:
    Connect the relay back to the wire harness connector, ensuring to reinstall any CPA devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you secure the relay after installation for the 2008 GMC Yukon? Posted by Customer
    A:
    Finally, secure the relay using the fasteners or tape that originally held it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19116962, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19116962 Fuel Pump Relay, Black. It is sometimes referred to as GM Relay, GM Turn Signal Flasher, GM Fuel Pump Relay, GM Headlight Relay. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19116962 Fuel Pump Relay, Black. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery