Make sure this part fits

GM 25876063
Rail

2007-2017 GM

Customer Questions & Expert Answers (6)
GM 25876063 Rail
  • Part Description
    Rail, Fuel
  • Replaces
    25809397, 15787093
  • Manufacturer
    General Motors
Make sure this part fits
$240.76 MSRP: $359.88
You Save: $119.12 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25876063
    Part DescriptionRail, Fuel
    Item Dimensions81.8 x 13.3 x 7.5 inches
    Item Weight5.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25809397, 15787093
    ManufacturerGeneral Motors
    SKU25876063
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2017 Buick EnclaveBase, Convenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2009-2017 Chevrolet TraverseLS, LT, LTZ, Premier6 Cyl 3.6 L GAS
    2007-2016 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2017 GMC Acadia LimitedBase6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25876063 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25876063 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel injectors and fuel rail on GMC Acadia? Posted by Customer
    A:
    The first step for Fuel Injector and Fuel Rail replacement starts with the removal of the Fuel Injector sight shield followed by disconnecting the engine wiring harness electrical connector from the Fuel Injector wiring harness electrical connector . The first step should include fuel feed pipe disconnect from quick connect fitting on the Fuel Rail before upper Intake Manifold removal. A compressed air supply should clean away any debris threatening the Fuel Injector entrance into the lower Intake Manifold. The necessary procedure includes removing the Fuel Rail bolts one by one before carefully extracting the Fuel Rail assembly to safeguard against jeopardizing the injector electrical connector terminals and spray tips while using a support stand to protect from damage. Drop caps on the fittings along with holes and secure them with plugs to block contaminants. The retainer holding the Fuel Injector electrical connector must be lifted while using the tab on the connector to detach it from its position. Remove the retain clip from the Fuel Injector and then take out the injector while discarding both seals. Begin the installation process with new Fuel Injector seals before installing both items and their retaining component. Reconnect the Fuel Injector electrical connector while securing it under the retainer through downward pressure. Attach the Fuel Rail with installed fuel injectors onto the lower Intake Manifold before torquing the rail bolts to 10 n.m (89 lb in). Complete the installation by placing the upper Intake Manifold onto its location before connecting the fuel feed pipe quick connect fitting to the Fuel Rail and reattaching the engine wiring harness electrical connector to the Fuel Injector wiring harness electrical connector . Last step is to install the Fuel Injector sight shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    What components need to be removed after relieving the fuel system pressure for the 2010 Buick Enclave? Posted by Customer
    A:
    Remove the fuel pipe shield, high pressure fuel sensor, and the fuel rail crossover pipe, discarding the crossover pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Rail
    Q:
    What are the torque specifications for the Bank 1 fuel rail bolts for the 2010 Buick Enclave? Posted by Customer
    A:
    Tighten the bolts to 12 Nm (106 lb in) on the first pass and 23 Nm (17 lb ft) on the final pass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Rail
    Q:
    What is the order of installation for the fuel rail bolts for the 2009 GMC Acadia? Posted by Customer
    A:
    Install the outer fuel rail bolts first, followed by the inner bolts, and hand tighten.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Rail
    Q:
    How should the rebuilt direct fuel injectors be installed for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Place the rebuilt direct fuel injectors into the cylinder heads and install new direct injector hold down clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Rail
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25876063, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25876063 Rail. It is sometimes referred to as GM Fuel Rail. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25876063 Rail. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery