How to replace the MAP Sensor on Buick Enclave?

To change the Manifold absolute pressure Sensor, you need to remove the fuel injector sight shield. Remove the manifold absolute pressure sensor on the engine wiring harness electrical connector from MAP sensor, then pull out the MAP sensor bolt as well as the sensor. Apply clean engine oil to the NEW MAP sensor O-ring seal and install the MAP sensor and bolt, securing the bolt to 10 N.m (89 lb in). Then, connect the MAP sensor to the engine wiring harness electrical connector and reinstall the fuel injector sight shield.

OEM Buick Enclave MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
Buick Enclave M.A.P. Sensor
Part Number: 55573248
$30.16 MSRP: $56.65
You Save: $26.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2024 Buick Enclave | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS

Buick Enclave MAP Sensor

Our website offers an extensive catalog of genuine Buick Enclave MAP Sensor at unbeatable prices. Every OEM Buick Enclave MAP Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Enclave MAP Sensor Parts Questions & Experts Answers

M.A.P. Sensor
55573248
Q: How to replace the MAP Sensor on Buick Enclave?
A: To change the Manifold absolute pressure Sensor, you need to remove the fuel injector sight shield. Remove the manifold absolute pressure sensor on the engine wiring harness electrical connector from MAP sensor, then pull out the MAP sensor bolt as well as the sensor. Apply clean engine oil to the NEW MAP sensor O-ring seal and install the MAP sensor and bolt, securing the bolt to 10 N.m (89 lb in). Then, connect the MAP sensor to the engine wiring harness electrical connector and reinstall the fuel injector sight shield.