What tools are required to replace the Transmission Oil Cooler Hose on Buick LeSabre?

The cooler quick connect tool (J 41623-B) stands as a necessary tool for changing transmission fluid cooler hose/pipe. First lift the vehicle before finding an appropriate resting point while having a drain pan in place. First disconnect the retainer holding the transaxle oil cooler hose at the transaxle before moving away the white plastic covers from the quick connections. Detach the transaxle oil cooler hoses from the transaxle and the Radiator through the use of the cooler quick connect tool (J 41623-B) so you can take the hoses off the vehicle. The installation of new transaxle oil cooler hoses will proceed by inserting the pipes through the car until the fittings on the Radiator quick connect activate. Visualize correct retention of hoses by applying mild force to the hose ends. After that, install the white plastic covers over the quick connections. Push the hoses until a click sound occurs when they reach the transaxle quick connect fittings then gently pull the hoses to verify retention. Check the fluid level after setting the transaxle oil cooler hose retainer to the transaxle device and lower the car then inspect both the fluid amount and signs of leakage.

OEM Buick LeSabre Transmission Oil Cooler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Transmission Oil Cooler Hoses found

View related parts
Buick LeSabre Line, Upper Part Number: 15233587
$32.89 MSRP: $49.31
You Save: $16.42 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler Upper; Pipe, Transmission Oil Cooler
- Position: Upper
- Replaces: 25663925, 25735890
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Line Part Number: 25663931
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Pipe
- Position: Upper
- Replaces: 25623917
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999, 1994-1995 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Pipe Part Number: 25659161
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler
- Position: Upper
- Replaces: 25615304, 25625874, 25606749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cooler Pipe Part Number: 25624177
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line; Line; Pipe
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cooler Line Part Number: 25615308
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line; Cooler Pipe; Pipe
- Position: Upper
- Replaces: 25535175
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Pipe, Lower Part Number: 25615306
Product Specifications
- Other Name: Pipe Assembly-Transmission Oil Cooler Lower; Pipe, Transmission Oil Cooler
- Position: Lower
- Replaces: 25606300
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cooler Line, Lower Part Number: 25615305
Product Specifications
- Other Name: Pipe Assembly-Transmission Oil Cooler Lower; Transmission Oil Cooler Line; Cooler Pipe; Line; Pipe; Pipe, Transmission Oil Cooler
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cooler Pipe Part Number: 25606751
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line; Line; Pipe
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Transmission Oil Cooler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Transmission Oil Cooler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Transmission Oil Cooler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick LeSabre Transmission Oil Cooler Hose Parts and Q&A

Line, Upper
15233587
Q: What tools are required to replace the Transmission Oil Cooler Hose on Buick LeSabre?
A:
The cooler quick connect tool (J 41623-B) stands as a necessary tool for changing transmission fluid cooler hose/pipe. First lift the vehicle before finding an appropriate resting point while having a drain pan in place. First disconnect the retainer holding the transaxle oil cooler hose at the transaxle before moving away the white plastic covers from the quick connections. Detach the transaxle oil cooler hoses from the transaxle and the Radiator through the use of the cooler quick connect tool (J 41623-B) so you can take the hoses off the vehicle. The installation of new transaxle oil cooler hoses will proceed by inserting the pipes through the car until the fittings on the Radiator quick connect activate. Visualize correct retention of hoses by applying mild force to the hose ends. After that, install the white plastic covers over the quick connections. Push the hoses until a click sound occurs when they reach the transaxle quick connect fittings then gently pull the hoses to verify retention. Check the fluid level after setting the transaxle oil cooler hose retainer to the transaxle device and lower the car then inspect both the fluid amount and signs of leakage.