How to replace the coil spring insulators on Buick Park Avenue?

Begin by supporting and raising the vehicle so the Control Arm can freely hang in the air before starting replacement of coil spring insulators. Start by removing the wheel assembly followed by using a jack stand to support the lower Control Arm. Start by unscrewing both absorber lower retaining bolts and the adjustment link retaining nut. Seal damage must be avoided during linkage joint separation procedures because insertion of a wedge tool between components results in damage. To split the adjustment link from the knuckle you must use the universal steering linkage puller (J 24319-B). Start by placing the Control Arm on the support assembly and using a downward warner to access the lower Coil Spring Insulator. They then extract the coil spring with its insulator. Follow additional instructions to remove the upper insulator while pulling it down. To install the component start by inserting the retainer from the upper insulator into the vehicle body before installing both the lower insulator and coil spring while verifying the insulator finds its seat in the Control Arm. Wedge the lower Control Arm to maximum height while installing shock absorber lower retaining bolts at a torque setting of 24 nm (18 ft. Lbs.). Attach the adjustment link to the Control Arm before tightening the adjustment link retaining nut to 50 nm (36 ft. Lbs.). As a final step install the automatic level control air tube to the shock absorber then reinstall the tire along with the wheel before lowering the vehicle.

OEM Buick Park Avenue Coil Spring Insulator

Coil Spring Noise Insulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Coil Spring Insulators found

View related parts
Buick Park Avenue Spring Seat, Front Part Number: 22181835
$10.45 MSRP: $17.22
You Save: $6.77 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Lower Retainer; Spring Insulator; Lower Spring Insulator; Lower Insulator; Dust Cover Lower Insulator; Lower Seat
- Position: Front
- Replaces: 22172025, 22172414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Rear Passenger Side Part Number: 25710008
$114.08 MSRP: $250.56
You Save: $136.48 (55%)
ADD TO CART
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Front Upper Part Number: 22128884
$25.39 MSRP: $50.96
You Save: $25.57 (51%)
ADD TO CART
Product Specifications
- Other Name: Seat, Front Spring Upper; Upper Insulator; Upper Mount Nut; Seat
- Position: Front Upper
- Replaced by: 22119701
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Front Part Number: 22166986
$2.09 MSRP: $10.37
You Save: $8.28 (80%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat, Front Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Front Part Number: 22129811
$14.55 MSRP: $69.28
You Save: $54.73 (79%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat, Front Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Insulator, Rear Part Number: 25703339
Product Specifications
- Other Name: Bumper, Rear Axle; Coil Spring Insulator; Spring Bumper; Upper Insulator; Spring Upper Insulator; Bumper; Bumper, Rear Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Insulator, Front Part Number: 22189860
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Upper Insulator; Upper Spring Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Front Part Number: 22189859
Product Specifications
- Other Name: Seat, Front Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Front Part Number: 22092693
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Spring Insulator; Upper Insulator; Spring Seat Upper Insulator; Upper Spring Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2001 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Rear Driver Side Part Number: 25710009
$63.91 MSRP: $114.13
You Save: $50.22 (44%)
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Insulator, Rear Lower Part Number: 25627582
Product Specifications
- Other Name: Insulator, Rear Spring Lower; Coil Spring Insulator; Lower Insulator; Spring Lower Insulator; Insulator; Insulator, Rear Spring
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Rear Part Number: 25535044
Product Specifications
- Other Name: Insulator, Rear Spring; Coil Spring Insulator; Spring Insulator; Upper Seat; Spring Lower Insulator; Spring Upper Insulator; Lower Seat; Seat; Insulator
- Position: Rear
- Replaces: 10028860
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Spring Seat, Front Part Number: 22098264
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Spring Insulator; Lower Spring Insulator; Lower Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Coil Spring Insulator

Want to cut long-term maintenance and repair costs? Choose OEM Coil Spring Insulator. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Coil Spring Insulator includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The part which is described is called Buick Park Avenue Coil Spring Insulator; it can substantially improve the build quality of a Buick Park Avenue, a full-size car that is famous for its comfort and elegance. This was particularly formulated to protect the vehicle's coil springs and frame as it prohibits the vibrating effect making the Coil Spring Insulator a durable part of the vehicle. This type of rubber isolator is located between the coil springs and Body of the Buick Park Avenue and its function is to absorb shocks in order to reduce incidences that will lead to quick deterioration of the commonly used part. Designed for use with a number of the Park Avenue models the Coil Spring Insulator has a very specific function which entails improving the car's performance and safety for the drivers to maintaining the vehicles stability while on the road. This car has a great history and people who used Buick Park Avenue will agree that including great quality components such as the Coil Spring Insulator in the car was an excellent idea especially when adopting the luxury and performance aspect. However, Coil Spring Insulator merchandise has occupied an important position in the automotive market because of strength and good insulation to the structural framework of cars. Due to its function of offering a protection layer above violent vibrations the Buick Park Avenue Coil Spring Insulator is a perfect example of Buick's commitment in delivering high quality products, which should make it an essential component for any owner of the Buick Park Avenue.

Buick Park Avenue Coil Spring Insulator Parts Questions & Experts Answers

Spring Seat, Rear Passenger Side
25710008
Q: How to replace the coil spring insulators on Buick Park Avenue?
A:
Begin by supporting and raising the vehicle so the Control Arm can freely hang in the air before starting replacement of coil spring insulators. Start by removing the wheel assembly followed by using a jack stand to support the lower Control Arm. Start by unscrewing both absorber lower retaining bolts and the adjustment link retaining nut. Seal damage must be avoided during linkage joint separation procedures because insertion of a wedge tool between components results in damage. To split the adjustment link from the knuckle you must use the universal steering linkage puller (J 24319-B). Start by placing the Control Arm on the support assembly and using a downward warner to access the lower Coil Spring Insulator. They then extract the coil spring with its insulator. Follow additional instructions to remove the upper insulator while pulling it down. To install the component start by inserting the retainer from the upper insulator into the vehicle body before installing both the lower insulator and coil spring while verifying the insulator finds its seat in the Control Arm. Wedge the lower Control Arm to maximum height while installing shock absorber lower retaining bolts at a torque setting of 24 nm (18 ft. Lbs.). Attach the adjustment link to the Control Arm before tightening the adjustment link retaining nut to 50 nm (36 ft. Lbs.). As a final step install the automatic level control air tube to the shock absorber then reinstall the tire along with the wheel before lowering the vehicle.