How to replace the emblem/nameplate on the quarter panel on Buick Park Avenue?

Following a placement of alignment marks with tape on the quarter panel will help install the emblem/nameplate and safeguard the mounting surface during removal. Apply the restricted use J 25070 Heat Gun (J 25070) to perform circular heat treatment of the emblem/nameplate for thirty seconds. A plastic flat tool should be used to carefully peel off the emblem/nameplate from the panel surface. Use all available methods to remove any remaining adhesive before installing the new emblem/nameplate. Use 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) or equivalent for body panels while using Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water for plastic panels for the removal process. Dry and clean the installation area before using tape to define the positioning of the emblem/nameplate on left/right side quarter panels for Park Avenue and Park Avenue Ultra models. Heat the mounting area with a J 25070 Heat Gun (J 25070) to reach 27-41°C (80-105°F). Keep the emblem/nameplate temperature at 29-32°C (85-90°F). Position the emblem/nameplate on the marks by removing protective tape from its back surface then firmly press it against the mounting area while using even pressure to achieve an equal bond distribution. After using the J 25070 Heat Gun (J 25070), the last step is to remove the protective tape from the mounting surface.

OEM Buick Park Avenue Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
Buick Park Avenue Emblem Part Number: 25551195
Product Specifications
- Other Name: Emblem, Wheel Cover Appearance; Wheel Center Cap
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Center Cap Part Number: 25534930
Product Specifications
- Other Name: Emblem, Wheel Cover Appearance; Wheel Center Cap; Hub Cap; Emblem; Insert; Insert, Wheel Cover Appearance
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Emblem, Front Part Number: 25640858
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Nameplate, Rear Part Number: 25740572
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Emblem, Front Part Number: 25630931
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate; Emblem, Roof Panel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Emblem Part Number: 25630930
Product Specifications
- Other Name: Emblem Assembly-Roof Side; Emblem, Roof Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Emblem, Rear Part Number: 25602037
Product Specifications
- Other Name: Plate Assembly-Rear Compartment Lid Name; Nameplate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Park Avenue Emblem serves as a symbol for dependability and high performance which demonstrates both the brand heritage and luxurious standards at Buick. The recognizable Buick emblem which gets installed as both a hood ornament and flat trunk attachment helps people recognize the cars while showcasing their high-quality characteristics. The full-size luxury car Park Avenue underwent extensive changes since 1975 when it was launched because its emblem adopted multiple design elements and materials through time. Every successive Park Avenue model utilizing the same emblem achieves both brand recognition and visual enhancement of its prestige because of its design flexibility across different models. The emblem operates as an identification marker which acts as a key safety and efficiency component because it integrates with advanced technology features in Park Avenue vehicles. The Park Avenue looks more prestigious in the automotive marketplace because of its innovative Dynaride system and its premium interior options. The Buick Park Avenue Emblem serves two purposes: it showcases attractive visual qualities with a mission to display the long-standing dedication to comfort as well as efficiency and dependability. The Buick emblem functions as a primary design element throughout the model model which effectively embodies the core Brand values of Buick automobiles.

Buick Park Avenue Emblem Parts Questions & Experts Answers

Emblem, Front
25640858
Q: How to replace the emblem/nameplate on the quarter panel on Buick Park Avenue?
A:
Following a placement of alignment marks with tape on the quarter panel will help install the emblem/nameplate and safeguard the mounting surface during removal. Apply the restricted use J 25070 Heat Gun (J 25070) to perform circular heat treatment of the emblem/nameplate for thirty seconds. A plastic flat tool should be used to carefully peel off the emblem/nameplate from the panel surface. Use all available methods to remove any remaining adhesive before installing the new emblem/nameplate. Use 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) or equivalent for body panels while using Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water for plastic panels for the removal process. Dry and clean the installation area before using tape to define the positioning of the emblem/nameplate on left/right side quarter panels for Park Avenue and Park Avenue Ultra models. Heat the mounting area with a J 25070 Heat Gun (J 25070) to reach 27-41°C (80-105°F). Keep the emblem/nameplate temperature at 29-32°C (85-90°F). Position the emblem/nameplate on the marks by removing protective tape from its back surface then firmly press it against the mounting area while using even pressure to achieve an equal bond distribution. After using the J 25070 Heat Gun (J 25070), the last step is to remove the protective tape from the mounting surface.