How to replace the rear liftgate hinge on Buick Park Avenue?

You must first disconnect the rear compartment lid and then eliminate the rear shelf trim panel before repairing the rear compartment lid hinge. Pull the torque rods out from their position on the hinge piece and remove hardware that holds the hinge to its spot on the car. Secure the new hinge by aligning it with the vehicle followed by fastening according to the Fastener Notice. Please fasten the hinge using nuts and bolts then tighten them to 24 N.m torque (18 lb-ft). Put the torque rods back onto their slots at the hinge and replace both the rear shelf trim panel and the rear compartment lid. Close the back compartment properly after installation.

OEM Buick Park Avenue Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Liftgate Hinges found

View related parts
Buick Park Avenue Lid Hinge, Rear Center
Part Number: 12398110
$17.48 MSRP: $25.01
You Save: $7.53 (31%)
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Seat Center Armrest; Compartment Box Hinge; Hinge; Hinge, Front Seat Center Arm Rest; Hinge, Front Seat Arm Rest; Hinge, Armrest
- Position: Rear Center
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Hinge, Rear Driver Side
Part Number: 25713985
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Door Hinge
- Position: Rear Driver Side
- Replaces: 25666164, 25697670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Hinge, Rear Driver Side
Part Number: 25540625
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Door Hinge; Hinge, Rear Compartment Lid
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Liftgate Hinge

Our website offers an extensive catalog of genuine Buick Park Avenue Liftgate Hinge at unbeatable prices. Every OEM Buick Park Avenue Liftgate Hinge comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Park Avenue Liftgate Hinge Parts Questions & Experts Answers

Lid Hinge, Rear Center
12398110
Q: How to replace the rear liftgate hinge on Buick Park Avenue?
A: You must first disconnect the rear compartment lid and then eliminate the rear shelf trim panel before repairing the rear compartment lid hinge. Pull the torque rods out from their position on the hinge piece and remove hardware that holds the hinge to its spot on the car. Secure the new hinge by aligning it with the vehicle followed by fastening according to the Fastener Notice. Please fasten the hinge using nuts and bolts then tighten them to 24 N.m torque (18 lb-ft). Put the torque rods back onto their slots at the hinge and replace both the rear shelf trim panel and the rear compartment lid. Close the back compartment properly after installation.