Other Name: Fan Assembly-Engine Cooler; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly; Fan Assembly; Fan Module; Fan, Engine Air Cooling(Electrical)
Fits the following Buick Models:
Encore | 2014-2021 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
Other Name: Fan Assembly; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly; Fan & Motor; Fan, Engine Air Cooling(Electrical)
Position: Driver Side
Fits the following Buick Models:
LaCrosse | 2010 | CX, CXL, CXS | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
Other Name: Fan Kit, Engine Air Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly.; Fan & Motor; Fan Kit, Engine Air Cooling(Electrical)
Position: Passenger Side
Replaces: 12463009
Fits the following Buick Models:
LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
Q: How to service and repair a radiator fan on Buick Rendezvous?
A: Start replacing the electric Radiator fan by first taking off the air cleaner along with duct assembly and then unplug the Radiator fan harness electrical connector. You should begin by taking away the right side diagonal brace together with loosening the engine mount strut nuts. Sliding brackets with bolts from the upper Radiator support allows you to rotate both stubs and brackets toward the back. The upper Radiator Hose must come off first together with both Radiator upper mount bolts then disconnect the Radiator upper mount and the Radiator Fan Shroud bolts. Use the hose clamp pliers (J 38185) to reposition the Radiator overflow hose clamp before detached and repositioning the hose and disconnecting the upper toc line running to the Radiator. Lift the vehicle while you detach the toc lines from the retainer clip on the fan module before letting the vehicle drop to the ground. The first step involves disconnecting engine wiring harness retainers which are mounted at the engine harness bracket before the harness wiring is repositioned and Radiator fans must be removed with their associated Radiator Fan Shroud. The first step of installation includes plugging in the Radiator fans to the Radiator Fan Shroud and moving the engine wiring harness to its proper position. First raise the vehicle while connecting the toc lines to the fan module retainer clip then lower the vehicle. After that disconnect the engine wiring harness retainers at the engine harness bracket and position the vehicle for installation. First connect the upper toc line to the Radiator before installing Radiator Fan Shroud bolts that should be tightened to 6 n.m (53 lb in). Afterward install Radiator upper mounts followed by their corresponding bolts which need to be tightened to 10 n.m (88 lb in). Utilize the hose clamp pliers (J 38185) to reposition the hose clamp before final installation of the upper Radiator Hose and the coolant overflow hose onto the Radiator. Begin by placing engine mount struts brackets evenly next to the upper Radiator support before you fasten the engine mount strut bracket brace bolts to 28 n.m (21 lb ft) torque followed by engine mount strut nut tightening to 48 n.m (35 lb ft). The right side diagonal brace and the Radiator fan harness electrical connector together with the air cleaner and duct assembly complete the installation process.