How to service and repair the fan shroud on Buick Regal?

Service and repair of the Fan Shroud starts with cooling fans removal through cooling fan replacement - electric procedures. The technician should first disconnect the cooling fan wiring harness from each cooling Fan Motor before pulling the cooling fan electrical harness away from the Fan Shroud. The service begins by removing first the cooling Fan Blade nut(s) and cooling Fan Blade(s) followed by removing the cooling Fan Motor(s) bolts to detach the cooling fan motors from the Fan Shroud. Begin fan installation by installing the cooling fan motors to the Fan Shroud according to the fastener notice in service precautions. Secure the cooling Fan Motor(s) bolt installation while tightening them to 6 nm (53 inch lbs.). The service precautions specify that mounting of cooling fan blades must occur with caution per Fan Blade assembly caution along with the cooling Fan Blade nut(s) that should get torqued to 6 nm (53 inch lbs.). The cooling fan electrical harness must be installed on the Fan Shroud before reconnecting the wiring harness with each cooling Fan Motor according to the cooling fan replacement - electric procedure.

How to replace the fan shroud on Buick Regal?

The replacement process for the Fan Shroud begins with cooling fan removal and disconnecting the cooling fan wiring harness from each cooling Fan Motor. Start with harness removal of the electrical system from the Fan Shroud before removing the cooling Fan Blade fasteners and fan blades. The cooling fan motors bolts need to be unscrewed before the fan motors can be retrieved from their position inside the Fan Shroud. The installation process starts with placing cooling fan motors on the Fan Shroud before tightening their bolts to 6 nm (53 inch lbs.) according to the fastener notice. You need to change any bent or damaged Fan Blade because unbalanced blades could fail while operation to create a serious safety hazard. The installation process of fan blades starts with checking for damage and balance and continues with mounting the blades using cooling Fan Blade nuts which should reach 6 nm (53 inch lbs.) torque. The Fan Shroud receives the cooling fan electrical harness and the wiring harness attaches to every Fan Motor before reinstallation of the fans.

OEM Buick Regal Fan Shroud

Radiator Fan Shroud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Fan Shrouds found

View related parts
Buick Regal Fan Shroud Part Number: 23131503
$297.71 MSRP: $445.01
You Save: $147.30 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly
- Replaces: 20979495
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Fan Shroud Part Number: 23138151
$34.12 MSRP: $50.77
You Save: $16.65 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Fan Shroud Part Number: 23104893
$178.87 MSRP: $267.37
You Save: $88.50 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS
View related parts
Buick Regal Fan Shroud Part Number: 20970655
$289.71 MSRP: $433.05
You Save: $143.34 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly; Cooling Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Fan Shroud Part Number: 25506412
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Shroud
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Regal | Base, Limited | 6 Cyl 4.1 L GAS
View related parts
Buick Regal Fan Shroud Part Number: 22915388
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Buick Regal | GS, Premium | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Shroud Part Number: 22506642
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Buick Regal | Base | 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Fan Shroud Part Number: 25506411
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Shroud
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Regal | Base, Limited | 6 Cyl 4.1 L GAS
View related parts
Buick Regal Shroud Part Number: 25505059
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Shroud, Radiator Fan; Fan Shroud
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS
View related parts
Buick Regal Shroud Part Number: 25505058
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Shroud, Radiator Fan; Fan Shroud
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS
View related parts
Buick Regal Fan Shroud Part Number: 13321421
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.4 L GAS
View related parts
Buick Regal Fan Shroud Part Number: 13241739
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Buick Regal | CXL, GS, Premium | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Shroud Part Number: 12494783
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Fan Shroud; Shroud Kit, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Buick Regal | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Shroud Part Number: 12463014
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Fan Shroud; Shroud Kit, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Shroud Part Number: 12367288
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Fan Shroud; Shroud Kit, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Buick Regal | GS, LS | 6 Cyl 3.8 L GAS

Buick Regal Fan Shroud

Want to cut long-term maintenance and repair costs? Choose OEM Fan Shroud. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Fan Shroud includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Regal Fan Shroud is an important part that plays a huge part in the overall performance of vehicles of this make. Fan Shroud is specifically intended to provide for the premier cooling, which is centered around the cooling fan blades, as well as to guard the fan against possible contamination. This important function is to regulate the temperature of the engine for the safe run of it, the effectiveness of the Buick Regal is increased. Adaptability to many Regal models in the years that the Fan Shroud has been designed for the model demonstrates its applicability to the Regal automobile, from the luxury coupes, to liftback sedans to the most recent development the TourX station wagons. The Buick Regal Fan Shroud does not usually feature often in the automotive market but when it does it is usually because its construction is very sturdy and its design is quite new and helps to enhance the cooling of the car engine much more than before thus increasing the life of the engine. Some of the features that have been integrated in the design of the Fan Shroud include; the optimal fitment and the air-flow dynamics, and all these are hallmarks of Buick quality and performance. Thus, with every new stage in the development of Buick Regal, the significance of the Fan Shroud remains the same; to help people trust their automobiles. Thus, the Buick Regal Fan Shroud is one of the components that contribute to the reliability of this car brand and the overall quality of the automobiles in the contemporary market.

Buick Regal Fan Shroud Parts and Q&A

Shroud
12463014
Q: How to service and repair the fan shroud on Buick Regal?
A:
Service and repair of the Fan Shroud starts with cooling fans removal through cooling fan replacement - electric procedures. The technician should first disconnect the cooling fan wiring harness from each cooling Fan Motor before pulling the cooling fan electrical harness away from the Fan Shroud. The service begins by removing first the cooling Fan Blade nut(s) and cooling Fan Blade(s) followed by removing the cooling Fan Motor(s) bolts to detach the cooling fan motors from the Fan Shroud. Begin fan installation by installing the cooling fan motors to the Fan Shroud according to the fastener notice in service precautions. Secure the cooling Fan Motor(s) bolt installation while tightening them to 6 nm (53 inch lbs.). The service precautions specify that mounting of cooling fan blades must occur with caution per Fan Blade assembly caution along with the cooling Fan Blade nut(s) that should get torqued to 6 nm (53 inch lbs.). The cooling fan electrical harness must be installed on the Fan Shroud before reconnecting the wiring harness with each cooling Fan Motor according to the cooling fan replacement - electric procedure.
Shroud
12494783
Q: How to replace the fan shroud on Buick Regal?
A:
The replacement process for the Fan Shroud begins with cooling fan removal and disconnecting the cooling fan wiring harness from each cooling Fan Motor. Start with harness removal of the electrical system from the Fan Shroud before removing the cooling Fan Blade fasteners and fan blades. The cooling fan motors bolts need to be unscrewed before the fan motors can be retrieved from their position inside the Fan Shroud. The installation process starts with placing cooling fan motors on the Fan Shroud before tightening their bolts to 6 nm (53 inch lbs.) according to the fastener notice. You need to change any bent or damaged Fan Blade because unbalanced blades could fail while operation to create a serious safety hazard. The installation process of fan blades starts with checking for damage and balance and continues with mounting the blades using cooling Fan Blade nuts which should reach 6 nm (53 inch lbs.) torque. The Fan Shroud receives the cooling fan electrical harness and the wiring harness attaches to every Fan Motor before reinstallation of the fans.