How to Replace the Front Rack and Pinion Steering Gear on Buick Regal?

The first step to change the Rack And Pinion is to support and raise the vehicle before placing a drain pan underneath. The tire and wheel assembly needs removal before disconnecting the intermediate shaft from the Rack And Pinion stub shaft to prevent damage. Unbolt the intermediate Steering Shaft at its lower attachment to the Rack And Pinion stub shaft after positioning the Steering Shaft with its block tooth aligned at 12 o'clock and wheels facing forward while maintaining an ignition switch lock position. Disconnect the intermediate Steering Shaft from the Rack And Pinion stub shaft then remove both tie rod ends from the steering knuckles. The rear of the frame needs support from jackstands while frame bolts at the rear need removing but take care to maintain sufficient frame height to avoid damaging nearby engine components. After lowering the frame rear portion, technicians must eliminate the Rack And Pinion pressure line and return hose from the assembly and the magnasteer variable assist electrical connector if the vehicle has this system. The technicians should detach the Rack And Pinion's mounting hardware followed by extracting the steering unit through the left wheel opening. Sliding the new Rack And Pinion through the left wheel opening marks the beginning of installation which requires bolt and nut mounting followed by torque settings at 80 nm (59 ft. Lbs.). Check threads on Rack And Pinion pressure line and return hose then replace and lubricate o-ring seals if visible damage is detected. Secure Rack And Pinion lines to the assembly before you connect the pressure line and return line and magnasteer connector if needed. When the frame reaches its proper position install new rear frame bolts before taking out the jackstands. Install the pinch bolt when the Steering Shaft is fully in position now tighten the bolt to 47 nm (35 ft. Lbs.). The last stage involves tire and wheel reinstallation followed by drain pan removal and vehicle lowering. The Rack And Pinion system requires fluid replenishment and system bleeding before leak inspections and front-end alignment.

OEM Buick Regal Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Rack And Pinions found

View related parts
Buick Regal Steering Gear Part Number: 19330581
$1684.99 MSRP: $3266.16
You Save: $1581.17 (49%)
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly; Rack
- Replaces: 22856135, 13271000, 22774358, 23139003
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Steering Gear Part Number: 84271183
$3782.55 MSRP: $4886.07
You Save: $1103.52 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly; Motor
- Replaced by: 84216769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Steering Gear Part Number: 7848137
$413.31 MSRP: $586.37
You Save: $173.06 (30%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Steering Gear Part Number: 26047206
$332.52 MSRP: $624.46
You Save: $291.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Kit, Steering; Gear Assembly
- Replaces: 26042017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Steering Gear Part Number: 22886743
$392.60 MSRP: $706.79
You Save: $314.19 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Hydraulic Rack & Pinion Steering; Gear, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Buick Regal | Base, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Steering Gear Part Number: 23242511
$2285.42 MSRP: $3623.52
You Save: $1338.10 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 22969531, 84494620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Steering Gear Part Number: 13366874
$2057.39 MSRP: $2755.51
You Save: $698.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Steering (W/Motor); Gear Assembly; Gear, Steering
- Replaced by: 84216770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 Buick Regal | Base, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Steering Gear Part Number: 84494624
$2294.31 MSRP: $3073.31
You Save: $779.00 (26%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Motor; Gear, Steering
- Replaces: 22978626, 23459790, 23153512, 23297469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Steering Gear Part Number: 84216770
$2144.18 MSRP: $2755.51
You Save: $611.33 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Electric Dual Pinion Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 13366874, 13376584, 22943370, 23338635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Worm Gear Part Number: 7817528
Product Specifications
- Other Name: Rack Kit-Piston & Nut Assembly; Steering Rack; Rack & Pinion; Input Shaft; Worm & Ball; Rack Assembly; Steering Gear Kit.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Steering Gear Part Number: 19330578
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Replaces: 22886742, 23139001, 22840287
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Buick Regal | Base, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Gear Assembly Part Number: 19330582
Product Specifications
- Other Name: Gear, Steering
- Replaces: 22869207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick Regal | GS | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Steering Gear Part Number: 26031078
Product Specifications
- Other Name: Gear Kit, Steering (Rack & Pinion) (Partial) (Remanufacture); Gear Assembly; Gear Kit, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick Regal | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Worm Gear Part Number: 7817526
Product Specifications
- Other Name: Rack-Piston Nut Kit-Hydraulic Steering Gear; Steering Rack; Rack & Pinion Steering Gear; Input Shaft, Worm & Ball, Worm Shaft, Rack Assembly, Rack Package, Worm Assembly, Piston.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Steering Gear Part Number: 7848140
Product Specifications
- Other Name: Gear-Steering
- Replaced by: 26087098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Regal Steering Gear Part Number: 26024892
Product Specifications
- Replaced by: 26044830
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Steering Gear Part Number: 26079916
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26063582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Steering Gear Part Number: 19330441
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26081813, 26079918, 88964314
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Buick Regal | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Steering Gear Part Number: 26079915
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26063586
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Steering Gear Part Number: 19330574
Product Specifications
- Other Name: Gear Assembly, Steering; Gear Assembly; Gear, Steering
- Replaces: 13270996, 20909314
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Buick Regal Rack And Pinion

Want to cut long-term maintenance and repair costs? Choose OEM Rack And Pinion. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Rack And Pinion includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Rack And Pinion in Buick Regal vehicles is a high-precision device that convert the rotary motion of the steering wheel into the linear motion of the front wheels. This mechanism mainly occurs through a rack and pinion technique in which the pinion engages the rack that is fitted in a metallic tube to enable the steering control. Buick Regal models over the years have generally used mechanical power assist type of steering system, namely rack and pinion type that makes the steering easier through hydraulics. Earlier models of cars including compact cars used manual racks, but present generation Buick Regal employs hydraulic power racks with the help of pressurized fluid in order to aid in the task of steering. There are different types of gears based on the design like straight and helical racks, straight racks are usually preferred due to their efficiency and lower operational temperatures. Problems with internal and external leakage, wear and tear of the gears within the Rack And Pinion and Damaged seals all arrive at expressive limitations in the multiple performance of the car's steering, where the steering turns match the viscosity of cement or extremely flexible such that any gentle force or shock from the road could be transferred to the wheels. This make it important for there to be regular maintenance on the Rack And Pinion so that it fulfills its required function in Buick Regal cars.

Buick Regal Rack And Pinion Parts Questions & Experts Answers

Steering Gear
26079915
Q: How to Replace the Front Rack and Pinion Steering Gear on Buick Regal?
A:
The first step to change the Rack And Pinion is to support and raise the vehicle before placing a drain pan underneath. The tire and wheel assembly needs removal before disconnecting the intermediate shaft from the Rack And Pinion stub shaft to prevent damage. Unbolt the intermediate Steering Shaft at its lower attachment to the Rack And Pinion stub shaft after positioning the Steering Shaft with its block tooth aligned at 12 o'clock and wheels facing forward while maintaining an ignition switch lock position. Disconnect the intermediate Steering Shaft from the Rack And Pinion stub shaft then remove both Tie Rod Ends from the Steering Knuckles. The rear of the frame needs support from jackstands while frame bolts at the rear need removing but take care to maintain sufficient frame height to avoid damaging nearby engine components. After lowering the frame rear portion, technicians must eliminate the Rack And Pinion pressure line and return hose from the assembly and the magnasteer variable assist electrical connector if the vehicle has this system. The technicians should detach the Rack And Pinion's mounting hardware followed by extracting the steering unit through the left wheel opening. Sliding the new Rack And Pinion through the left wheel opening marks the beginning of installation which requires bolt and nut mounting followed by torque settings at 80 nm (59 ft. Lbs.). Check threads on Rack And Pinion pressure line and return hose then replace and lubricate o-ring seals if visible damage is detected. Secure Rack And Pinion lines to the assembly before you connect the pressure line and return line and magnasteer connector if needed. When the frame reaches its proper position install new rear frame bolts before taking out the jackstands. Install the pinch bolt when the Steering Shaft is fully in position now tighten the bolt to 47 nm (35 ft. Lbs.). The last stage involves tire and wheel reinstallation followed by drain pan removal and vehicle lowering. The Rack And Pinion system requires fluid replenishment and system bleeding before leak inspections and front-end alignment.