How to replace the outer tie rod end on Buick Regal?

Start with the outer Tie Rod End replacement by utilizing the universal steering linkage puller (J 24319-01) to extract the prevailing torque nut from the assembly and manipulate the jam nut from the inner tie rod assembly. After using the identical puller to detach the outer tie rod assembly from the Steering Knuckle completely remove it from the inner tie rod assembly. Begin assembly by attaching the outer tie rod assembly to the inner tie rod but do not torque the jam nut. Afterward connect the outer tie rod assembly to the Steering Knuckle. When adjusting toe correct any puckering or twisting of the Rack and Pinion Boot before performing inner tie rod adjustments per manufacturer guidelines. The outer tie rod assembly installation process begins with fastening the prevailing torque nut to the outer tie rod stud and applying 30 nm (22 ft. Lbs.) of torque followed by an extra 115-degree turn of the nut before locking the jam nut against the outer tie rod to a final torque of 68 nm (50 ft. Lbs.).

How to properly service and repair a Tie Rod End on Buick Regal?

Begin by lifting and supporting the vehicle then removing wheels and tires as a first step to replace an outer Tie Rod End. Start by taking off the prevailing torque nut that secures the outer tie rod assembly followed by a loose procedure on the jam nut of the inner tie rod assembly. The universal steering linkage puller (J 24319-B) enables technicians to detach the outer tie rod assembly from its position on the Steering Knuckle. A wedge should be used between the joint and attached part to maintain the steering linkage connection and prevent seal destruction. The next step involves taking out the outer tie rod assembly from its position on the inner tie rod assembly. Secure the outer tie rod assembly to the inner tie rod assembly before tightening the jam nut but do not apply extra torque to it. Secure the Steering Knuckle with the outer tie rod assembly by using the prevailing torque nut until it reaches 30 n.m (22 lb ft) torque with an additional 120 degrees of rotation while maintaining 2 1/2 - 4 1/2 threads visible beyond the nylon washer. Complete the process by tightening the jam nut to 70 nm (52 ft. Lbs.), putting back the tire and wheel assembly, lowering the vehicle, followed by a front end alignment procedure.

OEM Buick Regal Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Tie Rod Ends found

View related parts
Buick Regal Outer Tie Rod, Passenger Side Part Number: 13272002
$97.87 MSRP: $168.08
You Save: $70.21 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick Regal | GS | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Outer Tie Rod Part Number: 13272000
$80.42 MSRP: $136.92
You Save: $56.50 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Buick Regal | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Outer Tie Rod Part Number: 84494628
$43.83 MSRP: $106.95
You Save: $63.12 (60%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 22776539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Outer Tie Rod, Passenger Side Part Number: 22776530
$36.43 MSRP: $106.18
You Save: $69.75 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer Passenger Side
- Replaced by: 84494633
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Outer Tie Rod Part Number: 84494632
$67.78 MSRP: $106.18
You Save: $38.40 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 22776529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Outer Tie Rod Part Number: 19418696
$51.95 MSRP: $126.79
You Save: $74.84 (60%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26056811, 89047697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Outer Tie Rod Part Number: 13286686
$68.60 MSRP: $117.82
You Save: $49.22 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Outer Tie Rod, Driver Side Part Number: 13272001
$105.87 MSRP: $168.08
You Save: $62.21 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick Regal | GS | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Outer Tie Rod Part Number: 26086580
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Buick Regal | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Tie Rod End, Outer Part Number: 7837733
Product Specifications
- Other Name: Rod, Outer Tie; Outer Tie Rod; Rod, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Outer Tie Rod Part Number: 26062163
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26021775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS

Buick Regal Tie Rod End

Want to cut long-term maintenance and repair costs? Choose OEM Tie Rod End. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Tie Rod End includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Tie Rod End can be described as an important link in a vehicle, especially in Buick Regal cars, which links the steering rack to the steering knuckles. This linkage is critical, particularly when it comes to balance on the vehicles and the general control of direction. The Tie Rod End consists of two components: There are two parts which include the inner tie rod end as well as the outer tie rod end that allow for easier operation of the steering wheel. This unit has looked at different styles of Tie Rod End used in Buick Regal which have evolved over the years to meet the changes in the design and performance of vehicles. The structural role is still to provide support and protection but suggestions may occur in the type of construction employed and the kind of material to be used affecting the long and short-term elasticity. In general, it can be stated that the Tie Rod End is one of the crucial components for safe and proper driving of Buick Regal vehicles.

Buick Regal Tie Rod End Parts and Q&A

Outer Tie Rod
19418696
Q: How to replace the outer tie rod end on Buick Regal?
A:
Start with the outer Tie Rod End replacement by utilizing the universal steering linkage puller (J 24319-01) to extract the prevailing torque nut from the assembly and manipulate the jam nut from the inner tie rod assembly. After using the identical puller to detach the outer tie rod assembly from the Steering Knuckle completely remove it from the inner tie rod assembly. Begin assembly by attaching the outer tie rod assembly to the inner tie rod but do not torque the jam nut. Afterward connect the outer tie rod assembly to the Steering Knuckle. When adjusting toe correct any puckering or twisting of the Rack and Pinion Boot before performing inner tie rod adjustments per manufacturer guidelines. The outer tie rod assembly installation process begins with fastening the prevailing torque nut to the outer tie rod stud and applying 30 nm (22 ft. Lbs.) of torque followed by an extra 115-degree turn of the nut before locking the jam nut against the outer tie rod to a final torque of 68 nm (50 ft. Lbs.).
Outer Tie Rod
26086580
Q: How to properly service and repair a Tie Rod End on Buick Regal?
A:
Begin by lifting and supporting the vehicle then removing wheels and tires as a first step to replace an outer Tie Rod End. Start by taking off the prevailing torque nut that secures the outer tie rod assembly followed by a loose procedure on the jam nut of the inner tie rod assembly. The universal steering linkage puller (J 24319-B) enables technicians to detach the outer tie rod assembly from its position on the Steering Knuckle. A wedge should be used between the joint and attached part to maintain the steering linkage connection and prevent seal destruction. The next step involves taking out the outer tie rod assembly from its position on the inner tie rod assembly. Secure the outer tie rod assembly to the inner tie rod assembly before tightening the jam nut but do not apply extra torque to it. Secure the Steering Knuckle with the outer tie rod assembly by using the prevailing torque nut until it reaches 30 n.m (22 lb ft) torque with an additional 120 degrees of rotation while maintaining 2 1/2 - 4 1/2 threads visible beyond the nylon washer. Complete the process by tightening the jam nut to 70 nm (52 ft. Lbs.), putting back the tire and wheel assembly, lowering the vehicle, followed by a front end alignment procedure.