How to change the Spark Plug Wires on a Buick Regal?

Start by turning off the ignition and taking off the fuel injector sight shield as the first step in Spark Plug wire replacement. Start by disconnecting Spark Plug Wires labeled (2, 4, 6) from their corresponding spark plugs at the engine's back while making a note of their original positions. Use j 38491 Spark Plug boot removal tool to twist each Spark Plug boot 1/2 turn before removal before prying the heat shield gently up from the spark plugs. Repeat this Spark Plug wire removal procedure for the wires (1, 3, 5) positioned at the engine's front end. Note down the same wire positions and deploy the Spark Plug boot removal tool (J 38491) for this step. Pluck out the ignition wires from their coils while also pulling out each retaining clip that reaches from the Ignition Coil to the engine's rear, front, and top points. Moving on to new Spark Plug wire installations only transfer boot heat shields with all Spark Plug wire retaining clips and conduit pieces. Follow these steps when adding new Spark Plug Wires to the engine: start installation with (1, 3, 5) at the front then move to (2, 4, 6) at the rear. After completing connections between ignition coils and spark plugs, replace the retaining clips. Reassemble first by connecting wires to spark plugs at the front then finish by connecting wires to spark plugs at the rear. The last step involves placing back the fuel injector sight shield.

OEM Buick Regal Spark Plug Wires

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Spark Plug Wires found

View related parts
Buick Regal Cable Set
Part Number: 19417604
$62.10 MSRP: $135.59
You Save: $73.49 (55%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192454, 12192191, 12192468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Buick Regal | GS, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Cable Set
Part Number: 19171850
$39.54 MSRP: $74.26
You Save: $34.72 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12173543, 12192153
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Buick Regal | Custom, Gran Sport, GS, Limited, LS, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Cable Set
Part Number: 19171849
$51.28 MSRP: $92.82
You Save: $41.54 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192421, 12192159, 12192071
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 Buick Regal | 25th Anniversary Edition, GS, GSE, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Cable Set
Part Number: 19154581
$44.22 MSRP: $96.54
You Save: $52.32 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Ignition Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12074087, 12074048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1995 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Cable Set
Part Number: 19170848
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12173542, 12192079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Buick Regal | Custom | 6 Cyl 3.1 L GAS
View related parts
Buick Regal Cable Set
Part Number: 19170846
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12096449
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Buick Regal | Custom | 6 Cyl 3.1 L GAS
View related parts
Buick Regal Cable Set
Part Number: 19154577
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12073938
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1993 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

Buick Regal Spark Plug Wires

Our website offers an extensive catalog of genuine Buick Regal Spark Plug Wires at unbeatable prices. Every OEM Buick Regal Spark Plug Wires comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Regal Spark Plug Wires Parts Questions & Experts Answers

Cable Set
19417604
Q: How to change the Spark Plug Wires on a Buick Regal?
A: Start by turning off the ignition and taking off the fuel injector sight shield as the first step in Spark Plug wire replacement. Start by disconnecting Spark Plug Wires labeled (2, 4, 6) from their corresponding spark plugs at the engine's back while making a note of their original positions. Use j 38491 Spark Plug boot removal tool to twist each Spark Plug boot 1/2 turn before removal before prying the heat shield gently up from the spark plugs. Repeat this Spark Plug wire removal procedure for the wires (1, 3, 5) positioned at the engine's front end. Note down the same wire positions and deploy the Spark Plug boot removal tool (J 38491) for this step. Pluck out the ignition wires from their coils while also pulling out each retaining clip that reaches from the Ignition Coil to the engine's rear, front, and top points. Moving on to new Spark Plug wire installations only transfer boot heat shields with all Spark Plug wire retaining clips and conduit pieces. Follow these steps when adding new Spark Plug Wires to the engine: start installation with (1, 3, 5) at the front then move to (2, 4, 6) at the rear. After completing connections between ignition coils and spark plugs, replace the retaining clips. Reassemble first by connecting wires to spark plugs at the front then finish by connecting wires to spark plugs at the rear. The last step involves placing back the fuel injector sight shield.