OEM Buick Rendezvous Throttle Body

Buick Rendezvous Throttle Body Parts Questions & Experts Answers

• Throttle Body
  12595275
  Q: How to replace the throttle body assembly on Buick Rendezvous?

  A: As a first step in Throttle Body assembly replacement start by draining coolant from the system. Begin the Throttle Body assembly replacement process by disconnecting these four components: the intake air temperature (IAT) sensor electrical connector, the breather tube from the air intake tube, idle air control (IAC) valve electrical connector, and the throttle position (TP) sensor electrical connector. Cables for accelerator control and Throttle Body bypass hoses along with its heater pipe nut must be removed. After undoing the securing hardware between the Throttle Body and Intake Manifold pull out the complete Throttle Body assembly. Never apply solvents when cleaning the Throttle Body assembly and Intake Manifold gasket surfaces because this will damage the gasket materials. Installation of a fresh gasket is necessary before putting in the Throttle Body assembly. Lock everything down with retaining nuts and bolts before applying a torque of 28 n.m (21 lb ft). After following the previous instructions, reattach the Throttle Body coolant bypass hoses, the heater pipe nut and the iac valve electrical connector in addition to the tp sensor electrical connector. The installation process includes reattaching the accelerator control cable bracket alongside the air intake tube and securing the clamp fittings. Inspection of throttle position occurs through accelerator pedal operation to verify complete movement between closed and wide open throttle (WOT) positions while you complete the installation by attaching the iat sensor electrical connector and breather tube to the air intake tube and adding coolant before checking throttle movement.