OEM Buick Rendezvous Throttle Cable

Buick Rendezvous Throttle Cable Parts and Q&A

• Throttle Cable
  12563915
  Q: How to replace the throttle cable on Buick Rendezvous?

  A:

  Installments for a new throttle cable begin with shield removal from the throttle cable when present while removing the cable connections from the throttle body lever and throttle cable bracket. Start by subtracting the left instrument panel sound insulator before disconnecting the throttle cable from the accelerator pedal. Push the throttle cable through the bulkhead as you squeeze its cover tangs then note the installation path before removing the cable from the vehicle. Follow the noted throttle cable pathway from removal with caution by keeping flexible parts at least 50 mm (2 in) away from all moving components unless they are securely mounted to avoid both interfering with and damaging the system. Rout the bulkhead snap retainer followed by cable connection through the accelerator pedal lever slot until the snap retainer fits properly into place. You should install the throttle cable to throttle body lever and throttle cable bracket before placing back the throttle cable shield if present. To finish the procedure check the full movement of the throttle by operating the pedal and verify that the carpet fulfills its intended position where the throttle mounts before installing the panel cover.