Q: How to replace the rear seat cushion pad on Buick LaCrosse?
A: Initial steps to change the rear seat cushion involve finding the left and right "T" handles under the seat beneath. You should press down on the seat while pulling the handles to release the seat retainer and then lift the cushion up and remove it from the seat back by pulling it backward. During installation press the front of the seat cushion to engage the floor pan retainers while verifying that the retainers stay locked.
Q: How to replace the front seat cushion pad and cover (w/ AM6) on Buick LeSabre?
A: The replacement process for front seat cushion cover and pad (w/ AM6) begins with disabling the sir system. The first step involves taking away the front bucket seat followed by the seat cushion frame. First detach all seat cushion cover j channels from the seat bottom frame followed by taking out the manual lumbar support knob and power Seat Switch then finally the armrest. Start by taking off the seat cushion cover along with its circular piece (1,4) before proceeding to remove the Seat Cushion Pad (2,3). The installation process begins with positioning the Seat Cushion Pad (2,3) directly on the seat cushion framework and following this step with the seat cushion cover (1,4) placement on the pad. Finally reattach the armrest and manual lumbar support knob along with the power Seat Switch whenever they are installed. Start by installing seat cushion cover j channels to the seat cushion frame before adding the seat cushion frame and finally the front bucket seat to the vehicle. The completion of the process requires activation of the sir system.
Q: How to Replace a Front Seat Cushion Pad on Buick Regal?
A: The first step for front seat cushion replacement requires vehicle removal of the front seat while using appropriate methods on either front bucket seats or split bench seats. The first step after front seat removal is to remove the front seat backrest. After detaching the front seat cushion cover from its surface users must extract the hog rings which held the front seat cushion together. Remove the front seat cushion by separating it from its frame position. Install the front seat cushion by affixing it to the front seat frame before locking the hog rings onto the front seat cushion then putting back the front seat cushion cover. The process closes with front seat back reattachment followed by installation of the front seat back into the vehicle according to the specialized procedures.