OEM Buick Terraza Battery Cable

Buick Terraza Battery Cable Parts Questions & Experts Answers

• Positive Cable
  88987138
  Q: How should you replace battery cables on Buick Terraza?

  A: Choose battery cables which have exactly the same type along with identical gauge measurement and similar length compared to the original cables. Start your replacement process by taking out the negative battery ground line from the battery then disconnect the electrical connector from the battery current sensor. Move on to disconnect the battery positive cable from the battery then unfasten the battery ground negative cable nut from the inner fender. Disconnect the battery positive cable first by removing its underhood electrical center nut and cable. Then move on to taking off the battery ground negative cable nut and cable from the transaxle stud. The starter motor BAT terminal requires removal of its nut as well as disconnection of the battery positive cable from this terminal. See all associated retainers detached from the inner fender and lower tie bar while also separating the battery ground negative and battery positive cables from the vehicle. Start the installation by attaching the negative ground and positive clip to their vehicle connections. Secure the battery cable conduit on the inner fender as well as the lower tie bar before attaching the battery positive cable and its nut at the starter motor BAT terminal with 10 N.m (89 lb in) tension. After placing the transaxle stud with the battery ground (negative) wire connect it using a 25 N.m (18 lb ft) torque value. The battery positive cable requires fastening to the underhood electrical center while tightening its nut to 10 N.m (89 lb in). The final step involves connecting the battery ground negative cable nut to the inner fender while tightening to 5 N.m (44 lb in). Launch the battery positive cable from the battery and tighten the battery terminal bolt to 16 N.m (12 lb ft) before connecting the battery current sensor electrical connector and completing with the battery ground (negative) cable installation to the battery.