OEM Buick Terraza Blend Door Actuator

Buick Terraza Blend Door Actuator Parts Questions & Experts Answers

• Actuator
  10364929
  Q: How to replace the RH Blend Door Actuator in a dual zone system on Buick Terraza?

  A: A dual zone system requires removal of the instrument panel compartment before proceeding with right air temperature actuator replacement. First disengage the electrical connector from the right air temperature actuator that should be located in its proper position. Severe the actuator by removing its bolts/screws then extract the actuator from its position. The actuator levers (3, 4) must be taken off when removal is required. Start installation by inserting actuator levers and ensuring the actuator lever fits correctly into the door during this process. Test the fitment of actuator levers (1, 2) before installing the actuator lever while ensuring primary tooth (3) of lever (3) lines up correctly with lever (2). To complete the installment, attach the right side air temperature actuator through bolts/screws while targeting 1.2 N.m (11 lb in) torque settings. Connect the electric connector while making sure the clip extends fully into the case mounting unit holder. The final step is to replace the instrument panel compartment while also performing actuator re-calibration procedures.