How to replace the control arm bushing in the rear suspension on Buick Terraza?

First, to replace the Control Arm bushing in the rear suspension, one should raise and support the vehicle. Apply a gesture where you support the Control Arm in front of the coil spring using a utility stand, then take off the bolts of the Control Arm from the rear axle. Drop the rear axle using the utility stand to get access to the Control Arm bushing, placing a mark indicating its orientation in the lower Control Arm. Make use of the j 28685 rear suspension bushing remover/installer and the j 9519-e ball joint remover/installer kit in dislodging the Control Arm bushing. For installation, set the flat edge of the new bushing to be 90 deg to the fluid axis which is 9 deg from the center line of Control Arm. Again, using j 28685 and the j 9519-e install the Control Arm bushing that extends 30mm (1.18in) from the Control Arm. It is rightly established when its extreme puts in display to the line indicator on the j 28685. Lift the rear axle with the utility stand reinstall the Control Arm Bolt at the rear axle, take off utility stand then put the vehicle down.

OEM Buick Terraza Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arm Bushings found

View related parts
Buick Terraza Lower Control Arm Bushing, Front
Part Number: 10260991
$15.09 MSRP: $24.69
You Save: $9.60 (39%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10264395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Terraza Lower Control Arm Front Bushing
Part Number: 10412124
$22.91 MSRP: $37.72
You Save: $14.81 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10393215, 10255029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Terraza Lower Control Arm Bushing
Part Number: 10412924
Product Specifications
- Other Name: Bushing; Axle Support Bushing; Control Arm Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Suspension Crossmember Bushing; Bushings; Bushing, Rear Axle Support And Control Arm; Bushing, Rear Axle Control Arm
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Buick Terraza Control Arm Bushing

Our website offers an extensive catalog of genuine Buick Terraza Control Arm Bushing at unbeatable prices. Every OEM Buick Terraza Control Arm Bushing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Terraza Control Arm Bushing Parts Questions & Experts Answers

Lower Control Arm Bushing
10412924
Q: How to replace the control arm bushing in the rear suspension on Buick Terraza?
A: First, to replace the Control Arm bushing in the rear suspension, one should raise and support the vehicle. Apply a gesture where you support the Control Arm in front of the coil spring using a utility stand, then take off the bolts of the Control Arm from the rear axle. Drop the rear axle using the utility stand to get access to the Control Arm bushing, placing a mark indicating its orientation in the lower Control Arm. Make use of the j 28685 rear suspension bushing remover/installer and the j 9519-e ball joint remover/installer kit in dislodging the Control Arm bushing. For installation, set the flat edge of the new bushing to be 90 deg to the fluid axis which is 9 deg from the center line of Control Arm. Again, using j 28685 and the j 9519-e install the Control Arm bushing that extends 30mm (1.18in) from the Control Arm. It is rightly established when its extreme puts in display to the line indicator on the j 28685. Lift the rear axle with the utility stand reinstall the Control Arm Bolt at the rear axle, take off utility stand then put the vehicle down.