A: You need to remove the air cleaner intake duct for the task of air filter replacement. To start the process remove the air cleaner intake duct. Then loosen the air cleaner cover screws while opening the cover to extract the air filter. Install the new air filter by placing it into position then secure the air cleaner cover by following the Fastener Notice. Fitting the screws for the air cleaner cover requires a torque specification of 8 N.m (71 lb in). Reinstall the duct that leads air into the air cleanser.
Q: How to change the Air Filter element on Cadillac SRX?
A: Begin by removing the air cleaner intake duct from your system before proceeding with air filter replacement. Before replacement start by unscrewing the air cleaner cover fasteners then open the cover to extract the air cleaner. Place the new air cleaner into position before closing the air cleaner cover while following handling instructions found on the fastener notice. After installing air cleaner cover screws you should tighten them to 8 N.m (71 lb in). The last step is to replace the air cleaner intake duct.
A: You need to begin by releasing the retainer latches followed by the air cleaner housing cover and finally remove the Air Filter. Rocklea installers should begin by placing the new Air Filter into the air cleaner housing before securing the housing cover and completing the retainer latch procedure.