To replace the inflatable restraint side impact sensor, first, the SIR system should be deactivated. Take off the front door trim panel, and remove the two fastener gently the inflatable restraint side impact sensor. Removed the inflatable restraint side impact sensor from the door and remove the inflatable restraint side impact sensor yellow 2-way harness connector by removing the connector position assurance (CPA). For installation put yellow 2-way harness connector to inflatable restraint side impact sensor and put the CPA on to connector. Next, Finally, install the inflatable restraint side impact sensor back to the door, using only hand tools for the fasteners tightening it to 10 N.m (89 lb in). Last of all, replace the door trim panel and activate the SIR system.