How to replace the front drive shaft on Cadillac Escalade ESV?

The replacement process for the front propeller shaft starts with acquiring clamp pliers - narrow jaw (J 43218). Your first step should be to make precise reference markings between propeller shafts and axles as well as between propeller shafts and wheel drive shafts and pinion flanges and output shafts to ensure proper remanufacturing of the original component relation. You should first apply the proper Transfer Case model procedure to eliminate the shield before lifting the vehicle to continue. A double clamp style boot on the vehicle requires removal of the Transfer Case clamp by using a flat-bladed tool to pry up its exposed end. When removing the propeller shaft it is necessary to make reference marks which show position relationships with the front axle pinion yoke and to prevent damage to the injection joints. Disconnect the propeller shaft from the front axle pinion yoke by removing its bolts and yoke retainers while protecting bearing roller loss through tape application on the bearing caps. Remove the propeller shaft forward by detaching the boot from the Transfer Case output shaft according to need. The Transfer Case output shaft splines need an inspection for proper lubrication state because insufficient lubrication requires application of gm p/n 12345879 or canadian p/n 10953511 which meets gm specification 9985830. Installation requires you to put a new clamp into the propeller shaft boot groove before adding the propeller shaft splines to the Transfer Case output shaft. A user can easily put single clamp style boot splices onto the Transfer Case output shaft. Reattach the propeller shaft to the front axle pinion yoke by positioning its reference marks as before and fasten it with yoke retainers and bolts while torquing them to 25 nm (18 ft. Lbs.). Once the boot covers the Transfer Case output shaft groove, follow with putting on the Transfer Case shield if needed and using clamp pliers - narrow jaw (J 43218) to crimp the clamp (if required) before lowering the vehicle.

OEM Cadillac Escalade ESV Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Drive Shafts found

View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 84202532
$391.47 MSRP: $672.31
You Save: $280.84 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front
- Replaces: 23147488, 23209520, 23251155
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2017 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft, Front
Part Number: 22760960
$390.31 MSRP: $682.55
You Save: $292.24 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft, Front
Part Number: 85519802
$280.29 MSRP: $440.92
You Save: $160.63 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Shaft, Propeller
- Position: Front
- Replaced by: 85075685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Slip Yoke
Part Number: 10390404
$1061.12 MSRP: $1365.68
You Save: $304.56 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Replaces: 15075236, 15090206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 84546234
$819.80 MSRP: $1276.56
You Save: $456.76 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Replaces: 23147489, 23251156, 84083946, 23209521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 84997913
$390.27 MSRP: $614.06
You Save: $223.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Shaft, Propeller
- Replaced by: 85816902
- Replaces: 84712240
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 84997911
$443.87 MSRP: $698.42
You Save: $254.55 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Shaft, Propeller
- Replaced by: 87821416
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 84202540
$945.28 MSRP: $1494.07
You Save: $548.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Replaces: 22760929, 23469163, 23251186
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 15814474
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft Assembly
Part Number: 15109397
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15713680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 22845688
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 10383383, 22828500, 20912703, 20871263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade ESV Drive Shaft
Part Number: 22760930
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

Cadillac Escalade ESV Drive Shaft

Our website offers an extensive catalog of genuine Cadillac Escalade ESV Drive Shaft at unbeatable prices. Every OEM Cadillac Escalade ESV Drive Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade ESV Drive Shaft Parts Questions & Experts Answers

Slip Yoke
10390404
Q: How to replace the front drive shaft on Cadillac Escalade ESV?
A: The replacement process for the front propeller shaft starts with acquiring clamp pliers - narrow jaw (J 43218). Your first step should be to make precise reference markings between propeller shafts and axles as well as between propeller shafts and wheel drive shafts and pinion flanges and output shafts to ensure proper remanufacturing of the original component relation. You should first apply the proper Transfer Case model procedure to eliminate the shield before lifting the vehicle to continue. A double clamp style boot on the vehicle requires removal of the Transfer Case clamp by using a flat-bladed tool to pry up its exposed end. When removing the propeller shaft it is necessary to make reference marks which show position relationships with the front axle pinion yoke and to prevent damage to the injection joints. Disconnect the propeller shaft from the front axle pinion yoke by removing its bolts and yoke retainers while protecting bearing roller loss through tape application on the bearing caps. Remove the propeller shaft forward by detaching the boot from the Transfer Case output shaft according to need. The Transfer Case output shaft splines need an inspection for proper lubrication state because insufficient lubrication requires application of gm p/n 12345879 or canadian p/n 10953511 which meets gm specification 9985830. Installation requires you to put a new clamp into the propeller shaft boot groove before adding the propeller shaft splines to the Transfer Case output shaft. A user can easily put single clamp style boot splices onto the Transfer Case output shaft. Reattach the propeller shaft to the front axle pinion yoke by positioning its reference marks as before and fasten it with yoke retainers and bolts while torquing them to 25 nm (18 ft. Lbs.). Once the boot covers the Transfer Case output shaft groove, follow with putting on the Transfer Case shield if needed and using clamp pliers - narrow jaw (J 43218) to crimp the clamp (if required) before lowering the vehicle.

Related Cadillac Escalade ESV Parts

Browse Cadillac Escalade ESV Drive Shaft by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003