How to replace the radiator fan and fan shroud on Cadillac Escalade ESV?

The procedure to change the Radiator fan and shroud (Non-HP2) must start by draining the cooling system fluid. Initiate the process by taking off the air inlet duct and separating the upper Radiator Hose from the Radiator before unclipping the Radiator inlet hose at the fan shroud location. The procedure requires moving the surge tank inlet hose clamp to different positioning before removing the surge tank inlet hose from the Radiator. To proceed with the replacement of the Radiator fan and shroud (Non-HP2) begin by disconnecting electrical connectors from Radiator fans while also removing the clip attaching wiring harness to the shroud and detaching transmission cooler lines bolts from fan shroud. Open the engine oil cooler line clip only if installation requires but also remove all cooler lines. To begin the Radiator fan shroud retainer bolts should be taken out followed by removing the Radiator fan and its shroud. Prepare installation by placing the three lower tabs into the Radiator support flange as you maintain the shroud in line with the Radiator. Fasten the Radiator fan to its position first before securing the shroud bolts at 9 n.m (80 lb in). Proceed by connecting the cooler lines through the clip before closing it yet continue by connecting electrical connectors to Radiator fans alongside fastening the wiring harness clip to the shroud. Twist all transmission cooling line bolts on the fan shroud into place until they reach 4 n.m (35 lb in) torque. The surge tank inlet hose needs installation onto the Radiator followed by adjusting the surge tank inlet hose clamp when needed. Hook the Radiator inlet hose clip at the fan shroud before reconnection of the upper Radiator Hose and air inlet duct installation. Finally, fill the cooling system.

OEM Cadillac Escalade ESV Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Radiator fans found

View related parts
Cadillac Escalade ESV Fan Blade
Part Number: 15017911
$64.98 MSRP: $133.52
You Save: $68.54 (52%)
ADD TO CART
Product Specifications
- Other Name: Blade, Engine Cooling; Radiator Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Fan Blade
Part Number: 89024933
$65.87 MSRP: $194.98
You Save: $129.11 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Replaces: 89023367
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Fan Blade
Part Number: 89023366
$90.19 MSRP: $185.34
You Save: $95.15 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Fan Blade
Part Number: 15780794
$98.69 MSRP: $202.80
You Save: $104.11 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Fan Blade
Part Number: 15780793
$103.31 MSRP: $192.77
You Save: $89.46 (47%)
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Fan & Motor, Passenger Side
Part Number: 84580369
$151.40 MSRP: $311.14
You Save: $159.74 (52%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Engine Cooling Fan; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Replaced by: 86778037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Fan Blade, Driver Side
Part Number: 20897351
$90.92 MSRP: $170.74
You Save: $79.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade ESV Fan Blade, Passenger Side
Part Number: 20897350
$91.59 MSRP: $165.78
You Save: $74.19 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX

Cadillac Escalade ESV Radiator fan

Our website offers an extensive catalog of genuine Cadillac Escalade ESV Radiator fan at unbeatable prices. Every OEM Cadillac Escalade ESV Radiator fan comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade ESV Radiator fan Parts Questions & Experts Answers

Fan Blade
89024933
Q: How to replace the radiator fan and fan shroud on Cadillac Escalade ESV?
A: The procedure to change the Radiator fan and shroud (Non-HP2) must start by draining the cooling system fluid. Initiate the process by taking off the air inlet duct and separating the upper Radiator Hose from the Radiator before unclipping the Radiator inlet hose at the fan shroud location. The procedure requires moving the surge tank inlet hose clamp to different positioning before removing the surge tank inlet hose from the Radiator. To proceed with the replacement of the Radiator fan and shroud (Non-HP2) begin by disconnecting electrical connectors from Radiator fans while also removing the clip attaching wiring harness to the shroud and detaching transmission cooler lines bolts from fan shroud. Open the engine oil cooler line clip only if installation requires but also remove all cooler lines. To begin the Radiator fan shroud retainer bolts should be taken out followed by removing the Radiator fan and its shroud. Prepare installation by placing the three lower tabs into the Radiator support flange as you maintain the shroud in line with the Radiator. Fasten the Radiator fan to its position first before securing the shroud bolts at 9 n.m (80 lb in). Proceed by connecting the cooler lines through the clip before closing it yet continue by connecting electrical connectors to Radiator fans alongside fastening the wiring harness clip to the shroud. Twist all transmission cooling line bolts on the fan shroud into place until they reach 4 n.m (35 lb in) torque. The surge tank inlet hose needs installation onto the Radiator followed by adjusting the surge tank inlet hose clamp when needed. Hook the Radiator inlet hose clip at the fan shroud before reconnection of the upper Radiator Hose and air inlet duct installation. Finally, fill the cooling system.

Related Cadillac Escalade ESV Parts

Browse Cadillac Escalade ESV Radiator fan by Years

2023 2022 2021 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003