Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Window Motor; Regulator; Regulator, Door And End Gate Window; Regulator, Door Inner Control
Position: Front Driver Side
Replaces: 15930527, 25790177, 15880564
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Window Motor; Regulator; Regulator, Door And End Gate Window; Regulator, Door Inner Control
Position: Front Passenger Side
Replaces: 15930528, 15880565, 25790178
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Other Name: Regulator, Front Door Window Regulator; Regulator; Regulator, Door And End Gate Window; Regulator, Door Inner Control
Position: Front Driver Side
Replaces: 20849960, 20916790, 25978146
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
| Page 1 of 2 |Next >
1-20 of 30 Results
Cadillac Escalade Window Regulator
Our website offers an extensive catalog of genuine Cadillac Escalade Window Regulator at unbeatable prices. Every OEM Cadillac Escalade Window Regulator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade Window Regulator Parts Questions & Experts Answers
Q: How to replace the front side door window regulator on Cadillac Escalade?
A: Before starting to replace the front side door Window Regulator you need to raise the window glass for support. The first step requires removal of trim panel and the water deflector while disconnecting the harness from the electric Window Motor assembly. The window glass must be disconnected from the regulator by first removing the two securing bolts followed by the bolts from the Window Regulator itself. You can remove the door Window Regulator assembly by bringing together its two sides after taking out the motor from the Window Regulator. Put the regulator inside the door structure then set it in place with proper orientation through a light twisting action. Before fastening the bolts tighten the regulator bolt threads with permatex threadlocker (Part Number 24200, GM P/N 12345382) to 9 n.m (80 lb in). Mount the window glass to the regulator after which regular bolts should be installed to hold it in place by applying the same torque measurement. After installation of the water deflectors and trim panels you must lower the window to check its proper functioning.