Q: How to replace the driver or passenger Seat Heater Pad on Cadillac Catera?
A: The first step for replacing driver and passenger seat cushion heaters requires front seat removal. You should remove the front seat cushion cover after that step. Cut the inner seams of the seat cover while maintaining the front appearance before cutting out the heater element wires and extracting both components from the cover. The new front seat cushion heating element needs to be placed inside the seat cover before reattaching the electrical wiring to the very spot where the old wiring harness was located. Use tape to fasten the newly installed heater element ends which have been folded over the seat cushion cover. After that complete by putting the front seat cushion cover back on and putting the front seat in its position.
Q: How to replace the rear Seat Heater Pad on Cadillac Escalade?
A: The procedure for replacing the rear seat cushion heater begins with removing the seat cushion trim cover followed by removing the cushion heater from the pad and disconnecting the seat cushion heater wiring harness. After completing wire harness installation for the cushion heater you must install the seat cushion heater then add the seat cushion trim cover.
Q: How to Replace the Front Seat Heater Pad and Cover When the Seat Heater Pad Is Not Serviceable on Cadillac SRX?
A: The heater element is integrated into the seat cover so replacements must include both components for the whole assembly. Proper replacement of the seat back cover and pad requires you to use instructions from seat back cover and pad replacement - front.