How to service and repair the flex plate and replace the engine flywheel on Cadillac Seville?

The first step of flex plate service requires obtaining a torque/angle meter which is identified by j 36660-a. Start by removing the transaxle assembly then discard the use of Flywheel bolts. First remove all eight mounting bolts before proceeding to take away the Flywheel and the reinforcement. Check the engine Flywheel for cleanliness and inspect it before placing it on the Crankshaft together with the reinforcement. The new Flywheel mounting bolts require application of gm p/n 12346004 sealant or its equivalent. The installation requires eight new mounting bolts which need to be tightened to 15 nm (11 ft. Lbs.) during the first tightening procedure. The torque/angle meter (J 36660-A) should be used during the final bolt tightening procedure by adding 50 degrees of torque. Finally, reinstall the transaxle assembly.

OEM Cadillac Seville Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Flywheels found

View related parts
Cadillac Seville Drive Plate
Part Number: 3544671
$97.14 MSRP: $136.33
You Save: $39.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Flywheel; Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Drive Plate
Part Number: 3521829
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Cadillac Seville | Base, STS | 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Drive Plate
Part Number: 22500808
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Cadillac Seville | Base, Elegante | 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Seville Drive Plate
Part Number: 1648458
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1990 Cadillac Seville | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
View related parts
Cadillac Seville Drive Plate
Part Number: 1623936
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Cadillac Seville | Base, Elegante | 8 Cyl 4.1 L GAS
View related parts
Cadillac Seville Drive Plate
Part Number: 12568988
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS

Cadillac Seville Flywheel

Our website offers an extensive catalog of genuine Cadillac Seville Flywheel at unbeatable prices. Every OEM Cadillac Seville Flywheel comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Seville Flywheel Parts Questions & Experts Answers

Drive Plate
3544671
Q: How to service and repair the flex plate and replace the engine flywheel on Cadillac Seville?
A: The first step of flex plate service requires obtaining a torque/angle meter which is identified by j 36660-a. Start by removing the transaxle assembly then discard the use of Flywheel bolts. First remove all eight mounting bolts before proceeding to take away the Flywheel and the reinforcement. Check the engine Flywheel for cleanliness and inspect it before placing it on the Crankshaft together with the reinforcement. The new Flywheel mounting bolts require application of gm p/n 12346004 sealant or its equivalent. The installation requires eight new mounting bolts which need to be tightened to 15 nm (11 ft. Lbs.) during the first tightening procedure. The torque/angle meter (J 36660-A) should be used during the final bolt tightening procedure by adding 50 degrees of torque. Finally, reinstall the transaxle assembly.