How to replace the Seat Motor on Cadillac Seville?

Question

Accepted Answer

Disabling the SIR system represents the first step before starting motor replace operations on the seat adjuster. First remove the seat from the vehicle before taking off the seat cushion to reach the seat adjuster motors. Choose which type of motor needs replacement among the rear vertical adjuster motor , front vertical adjuster motor or horizontal adjuster motor . The seat adjuster drive cables need to be detached from the motor after disconnecting its electrical connector. Drill the factory motor inserts out from the bottom side of the seat motor plate by placing the seat backside down on a clean dry surface using a 3/16 in drill bit. To secure the new seat adjuster motor on its motor plate, first insert the motor insert into the motor grommet of the motor followed by using the bolt to connect the motor to the motor plate and tightening it to 4 N.m (36 lb in). Reestablish the seat adjuster drive cables along with reconnecting the electrical connector. Position the seat first followed by the seat cushion and reinstall them to the vehicle. The system activation for SIR must be enabled and either memory seat calibration needs to be performed if applicable.

OEM Cadillac Seville Seat Motor

4 Seat Motors found

Cadillac Seville Seat Track, Driver Side

Cadillac Seville Recliner Motor, Front

Cadillac Seville Adjuster Motor

Cadillac Seville Recliner Motor, Front

Cadillac Seville Seat Motor

Cadillac Seville Seat Motor Parts Questions & Experts Answers

Related Cadillac Seville Parts

Browse Cadillac Seville Seat Motor by Years