OEM 2000 Cadillac Seville Seat Motor

2000 Cadillac Seville Seat Motor Parts Questions & Experts Answers

• Q: How to replace the Front Seat Recliner Seat Motor on 2000 Cadillac Seville?

  A: Start by disabling SIR before you can replace the Front Seat Recliner Actuator Motor. The first step includes seat assembly removal followed by a seat back trim cover uninstallation. Position the recliner shaft so it passes through the outboard side of the recliner motor then remove its retainer clip from the recliner motor end before pulling the recliner shaft clear of both components including any recliner sensor present. The recliner motor and recliner sensor electrical connections should be disconnected from beneath the seat after which you should free the recliner sensor from the recliner motor. Unfasten the motor's assembly clip while you remove the motor from its seat back frame position. Position the recliner motor onto its frame on the seat back and fasten it securely at 9 N.m torque strength (80 lb in). For the recliner motor electrical connector installation hook it up next. Also install the recliner sensor onto the motor for vehicles with memory-seat capabilities. Position the recliner shaft through both the recliner sensor and recliner motor before connecting the recliner sensor electrical connector where needed. Reinstate the seat after fitting the retaining clip to the recliner shaft while reinstalling the seat back trim cover. To complete installation enable the SIR system and run seat calibration on vehicles with memory seat capability.