Other Name: Knob Assembly-Automatic Transmission Control Lever *Black; Automatic Transmission Selector Handle; Knob, Transmission Gear Shift Control; Knob, Transmission Control Lever
Fits the following Cadillac Models:
CT4 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS
Other Name: Knob Assembly-Manual Transmission Control Lever (W/ Boot & W/ S*Black; Automatic Transmission Selector Handle; Knob, Transmission Gear Shift Control; Knob, Transmission Control Lever
Other Name: Knob, Automatic Transmission Control Lever; Automatic Transmission Selector Handle; Knob, Transmission Gear Shift Control; Knob, Transmission Control Lever
Replaces: 20906543, 22963218
Fits the following Cadillac Models:
ATS | 2013-2019 | Base, Luxury, Performance, Premium, Premium Luxury, Premium Performance, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Other Name: Knob Assembly-Automatic Transmission Control Lever *Ebony; Automatic Transmission Selector Handle; Knob, Transmission Gear Shift Control; Knob, Transmission Control Lever
Fits the following Cadillac Models:
CTS | 2010-2014 | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Q: How to replace the Shift Knob and closeout boot on Cadillac CTS?
A: A person should detach the shift closeout boot retaining ring from the console by lifting its rear section to begin replacing the shift knob and closeout boot. The process of removing the shift knob from the shift lever demands forceful pulling efforts because people must hold the knob firmly while pulling it upward straight. Install the new assembly by fitting it to the shift lever then apply strong pressure to the shift knob until it locks into place. The procedure requires inserting the front tabs of the shift closeout boot retaining ring inside the console before using your hand to apply downward pressure on its rear section for proper seating. Check the mounting security of retaining the ring by gently pulling on it followed by verification of proper attachment to the console.
Q: How to Change the Shift Knob on a Cadillac DTS?
A: The floor Shift Knob replacement process starts by setting the parking brake followed by shutting off the engine before selecting neutral transmission gear. When disconnecting the Shift Knob it will require strong physical force but users should maintain their grip on the knob while pulling upward straight. Press down on the Shift Knob until it makes an audible sound and the internal clip completely seats. Change the transmission to park while you let go of the parking brake.