How to replace the front lower control arm bushing on Cadillac SRX?

Begin the front lower control arm bushing replacement by raising and supporting the entire vehicle. Replace the front lower control arm rear bolts before you remove and discard the front lower control arm bushing bolt . Install a new bolt into this location. Remember the markings on the bushing before extraction and protect the bushing front on the lower control arm during replacement. The bushing removal process requires positioning the control arm beyond the vehicle's underside. The installation process requires that the new lower control arm bushing goes in so the markings point toward the vehicle's rear while you delay tightening the bushing bolt until the vehicle reaches its standard operating height. Install the new lower control arm bushing bolt first then secure the front lower control arm rear bolts. When the vehicle reaches curb height tighten the lower control arm bushing bolt to 55 Nm (41 lb ft) while turning it an additional 90 degrees. Check the alignment status of the front wheels as the last step.

OEM Cadillac SRX Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arm Bushings found

View related parts
Cadillac SRX Lower Control Arm Rear Bushing Part Number: 22980140
$136.19 MSRP: $233.90
You Save: $97.71 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing-Front Lower Control Arm Rear; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Lower
- Replaces: 20928345, 22833485, 20838584, 20903482
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Suspension Crossmember Rear Bushing Part Number: 20837929
Product Specifications
- Other Name: Mount; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS

Cadillac SRX Control Arm Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac SRX parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac SRX Control Arm Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

In relation to automobile products, the Control Arm Bushing is known as a dependable suspension system part that is widely used in many Cadillac SRX models. Actually, a Control Arm Bushing is an element that has to damp vibrations and reduce the friction between the control arm and the body of the vehicle; besides, it helps to act as a pivot to allow for smooth movements according to the road and turning of the steering wheel. This functionality is especially important for increasing both productivity and safety since any interactions in the roll direction are undesirable, as it leads to improved stability when driving. For the Control Arm Bushing Cadillac has used the materials affiliated to rubber, polyurethane and synthetic elastomers with some differences in the durability and performance. The Cadillac SRX, which went through two generations in 2003-2016, appreciates the high-quality effect of primary spare parts such as the Control Arm Bushing for the car's performance features that include towing capacity of up to 3,500 pounds and fuel economy of 19/25 mpg for the front-wheel-drive models. However, it is the Control Arm Bushing that gymnastics in the automotive market owning to the excellent engineering of the product, which possibly contributes to improved ride and handling characteristics besides safety features of the Cadillac SRX, a part and parcel of the luxury and power that Cadillac offers. This Control Arm Bushing proves the dependability of Cadillac cars since it is one of their designs that buyers can trust.

Cadillac SRX Control Arm Bushing Parts Questions & Experts Answers

Lower Control Arm Rear Bushing
22980140
Q: How to replace the front lower control arm bushing on Cadillac SRX?
A:
Begin the front lower control arm bushing replacement by raising and supporting the entire vehicle. Replace the front lower control arm rear bolts before you remove and discard the front lower control arm bushing bolt . Install a new bolt into this location. Remember the markings on the bushing before extraction and protect the bushing front on the lower control arm during replacement. The bushing removal process requires positioning the control arm beyond the vehicle's underside. The installation process requires that the new lower control arm bushing goes in so the markings point toward the vehicle's rear while you delay tightening the bushing bolt until the vehicle reaches its standard operating height. Install the new lower control arm bushing bolt first then secure the front lower control arm rear bolts. When the vehicle reaches curb height tighten the lower control arm bushing bolt to 55 Nm (41 lb ft) while turning it an additional 90 degrees. Check the alignment status of the front wheels as the last step.