How to replace the steering knuckle on Cadillac SRX?

Steering Knuckle replacement differs in two steps beginning with vehicle elevation and support and continuing with wheel rim retention followed by wheel steering unit removal. The universal steering linkage puller (J 24319-B) assists with tie rod disconnect from the Steering Knuckle while you remove the outer tie rod to Steering Knuckle retaining nut. After removing the brake hose bracket to Steering Knuckle retaining bolts you should remove the upper control arm ball stud to Steering Knuckle retaining nut before finalizing with the upper control arm ball stud separation from the Steering Knuckle. The ball joint remover (J 43631) disconnects the lower control arm ball stud and the Steering Knuckle before final removal of the Steering Knuckle. During installation secure the Steering Knuckle to the lower control arm ball stud before installing a new lower control arm ball stud retaining nut which should be tightened first to 20 nm (15 ft. Lbs.) and then to an additional 210 degrees. Install the upper control arm ball stud onto the Steering Knuckle with a new retaining nut preceding a 20 nm (15 ft. Lbs.) torque then an additional 210 degrees of nut rotation. Secure the brake hose bracket by installing bolts that retain the Steering Knuckle before you attach the outer tie rod to the Steering Knuckle and finally tighten the outer tie rod retaining nut to 70 nm (52 ft. Lbs.). Afterward install the wheel bearing/hub followed by the tire and wheel before lowering the vehicle.

OEM Cadillac SRX Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Knuckles found

View related parts
Cadillac SRX Knuckle, Driver Side
Part Number: 22861294
$311.73 MSRP: $513.50
You Save: $201.77 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaced by: 23118360
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Knuckle, Passenger Side
Part Number: 25998394
$97.64 MSRP: $180.37
You Save: $82.73 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18048937
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Knuckle
Part Number: 88952000
$154.23 MSRP: $254.07
You Save: $99.84 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Knuckle, Driver Side
Part Number: 25998393
$95.35 MSRP: $180.37
You Save: $85.02 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 18048936
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Knuckle, Rear Passenger Side
Part Number: 23118377
$100.15 MSRP: $159.00
You Save: $58.85 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 20815853, 22752735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Knuckle, Passenger Side
Part Number: 23118361
$326.36 MSRP: $513.50
You Save: $187.14 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 25783444, 22861295, 22752737
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Knuckle
Part Number: 23118360
$311.73 MSRP: $513.50
You Save: $201.77 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Rear
- Replaces: 22752736, 22861294, 25783443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Knuckle
Part Number: 88951999
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

Cadillac SRX Steering Knuckle

Our website offers an extensive catalog of genuine Cadillac SRX Steering Knuckle at unbeatable prices. Every OEM Cadillac SRX Steering Knuckle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac SRX Steering Knuckle Parts Questions & Experts Answers

Knuckle
88952000
Q: How to replace the steering knuckle on Cadillac SRX?
A: Steering Knuckle replacement differs in two steps beginning with vehicle elevation and support and continuing with wheel rim retention followed by wheel steering unit removal. The universal steering linkage puller (J 24319-B) assists with tie rod disconnect from the Steering Knuckle while you remove the outer tie rod to Steering Knuckle retaining nut. After removing the brake hose bracket to Steering Knuckle retaining bolts you should remove the upper control arm ball stud to Steering Knuckle retaining nut before finalizing with the upper control arm ball stud separation from the Steering Knuckle. The ball joint remover (J 43631) disconnects the lower control arm ball stud and the Steering Knuckle before final removal of the Steering Knuckle. During installation secure the Steering Knuckle to the lower control arm ball stud before installing a new lower control arm ball stud retaining nut which should be tightened first to 20 nm (15 ft. Lbs.) and then to an additional 210 degrees. Install the upper control arm ball stud onto the Steering Knuckle with a new retaining nut preceding a 20 nm (15 ft. Lbs.) torque then an additional 210 degrees of nut rotation. Secure the brake hose bracket by installing bolts that retain the Steering Knuckle before you attach the outer tie rod to the Steering Knuckle and finally tighten the outer tie rod retaining nut to 70 nm (52 ft. Lbs.). Afterward install the wheel bearing/hub followed by the tire and wheel before lowering the vehicle.

Related Cadillac SRX Parts

Browse Cadillac SRX Steering Knuckle by Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004