How to replace the rear wheel bearing and hub on Cadillac SRX?

You need to put the vehicle in a lifted position to access the rear Wheel Bearing and hub. Take off the wheel and tire before you remove the brake rotor from the back. Detach the Wheel Speed Sensor electrical plug and the backing plate connection. Unthread and dispose of the wheel drive shaft retaining nut before gently untightening the upper Control Arm to knuckle retaining nut. Use the ball joint remover (J 43631) to disconnect the upper Control Arm from the knuckle but keep the outer constant velocity boot seal clear of the tool to protect it. Cut the wheel-bearing/hub retaining bolts before placing the Wheel Hub remover (J 45859) tool directly onto the vehicle. Insert the Wheel Hub remover (J 45859) onto the vehicle to detach the wheel drive shaft from the Wheel Bearing/hub before taking the Wheel Bearing/hub out from the vehicle. Position the new Wheel Bearing/hub correctly before tightening bolt sets to 125 nm (92 ft. Lbs). Place the Control Arm back onto the knuckle and bolt it in. Tighten the upper ball joint nut first to 20 nm (15 ft. Lbs.) while rotating it another 210 degrees. Put on another wheel drive shaft retaining nut and torque it to 160 nm (118 ft. Lbs.) torque value. Attach the brake rotor and link the Wheel Speed Sensor electrical cord to the backing plate before attaching the Wheel Speed Sensor electrical cord. Lower the vehicle after installing the tire and wheel.

OEM Cadillac SRX Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Bearings found

View related parts
Cadillac SRX Hub & Bearing, Front Part Number: 12413103
$106.31 MSRP: $198.37
You Save: $92.06 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub, Front Wheel; Wheel Bearing and Hub Assembly; ABS Sensor; Repair Kit.; Front Speed Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Hub & Bearing Part Number: 89047639
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Front Hub & Bearing Part Number: 13589508
Product Specifications
- Other Name: Bearing Assembly-Front Wheel; Wheel Hub & Bearing Repair Kit.; Hub & Bearing; Hub
- Position: Front
- Replaces: 13580489, 13504971, 13502789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Hub & Bearing, Front Part Number: 25998408
Product Specifications
- Other Name: Bearing Assembly, Front Wheel; Wheel Hub Repair Kit; ABS Sensor.; Front Speed Sensor; Hub, Front Wheel
- Position: Front
- Replaces: 12413105
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

Cadillac SRX Wheel Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac SRX parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac SRX Wheel Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Cadillac SRX Wheel Bearing can be described as the hugely important entity which plays a crucial role in improving the dependability and efficiency of Cadillac SRX automobiles. Located within the wheel to allow the easy rotation of the wheels, the wheel bearing reduces the amount of friction within the wheel and tire assembly. The Cadillac SRX models which have been manufactured from 2003 to 2016 include two generations, and there are different types of hubs and bearing that have been used in its manufacturing processes; however, the most commonly used hub and bearing assembly is the integral hub and bearing assembly. This assembly may include an ABS sensor, which denotes its importance in the improvement of safety. Original Wheel Bearing should be inspected and maintained on a regular basis because a damaged wheel bearing results to noise, vibration or even losing the wheel which can be dangerous to the vehicle as well as the environmen The article shows that Cadillac pays much attention to the quality of products and the SRX model concerns high-quality parts and advanced technologies, so it is popular in the US market. Another positive thing that can be said about Cadillac SRX Wheel Bearing is its durability and versatility as it works for both the FWD and AWD vehicles. Also, the ability of the SRX to tow others and its fuel economy possess the significance of Wheel Bearing as part of the car structure. In conclusion, therefore, it could be noted that the Cadillac SRX Wheel Bearing is a very critical aspect of the car that makes Cadillac to stand out in terms of luxury, power and safety in the market.

Cadillac SRX Wheel Bearing Parts Questions & Experts Answers

Hub & Bearing
89047639
Q: How to replace the rear wheel bearing and hub on Cadillac SRX?
A:
You need to put the vehicle in a lifted position to access the rear Wheel Bearing and hub. Take off the wheel and tire before you remove the brake rotor from the back. Detach the Wheel Speed Sensor electrical plug and the backing plate connection. Unthread and dispose of the wheel drive shaft retaining nut before gently untightening the upper Control Arm to knuckle retaining nut. Use the ball joint remover (J 43631) to disconnect the upper Control Arm from the knuckle but keep the outer constant velocity boot seal clear of the tool to protect it. Cut the wheel-bearing/hub retaining bolts before placing the Wheel Hub remover (J 45859) tool directly onto the vehicle. Insert the Wheel Hub remover (J 45859) onto the vehicle to detach the wheel drive shaft from the Wheel Bearing/hub before taking the Wheel Bearing/hub out from the vehicle. Position the new Wheel Bearing/hub correctly before tightening bolt sets to 125 nm (92 ft. Lbs). Place the Control Arm back onto the knuckle and bolt it in. Tighten the upper ball joint nut first to 20 nm (15 ft. Lbs.) while rotating it another 210 degrees. Put on another wheel drive shaft retaining nut and torque it to 160 nm (118 ft. Lbs.) torque value. Attach the brake rotor and link the Wheel Speed Sensor electrical cord to the backing plate before attaching the Wheel Speed Sensor electrical cord. Lower the vehicle after installing the tire and wheel.