ChevyParts
My Garage
My Account
Cart
OEM 2009 Cadillac SRX Wheel Bearing
Hub Bearing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Wheel Bearings found
2009 Cadillac SRX Hub & Bearing, Front
Part Number: 12413103$105.64 MSRP: $198.37You Save: $92.73 (47%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hub, Front Wheel; Wheel Bearing and Hub Assembly; ABS Sensor; Repair Kit.; Front Speed Sensor
- Position: Front
- Item Weight: 8.80 Pounds
- Item Dimensions: 7.3 x 7.0 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12413103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Item Weight: 8.40 Pounds
- Item Dimensions: 7.2 x 7.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89047639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Bearing Assembly, Front Wheel; Wheel Hub Repair Kit; ABS Sensor.; Front Speed Sensor; Hub, Front Wheel
- Position: Front
- Replaces: 12413105
- Item Weight: 8.60 Pounds
- Item Dimensions: 7.4 x 7.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25998408
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac SRX Wheel Bearing
With a comprehensive array of OEM 2009 Cadillac SRX Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Cadillac SRX Parts Questions & Experts Answers
- Q: How to replace the rear wheel bearing and hub on 2009 Cadillac SRX?A: Lift and stabilize your vehicle before you take off both tire and wheel components. Start by unplugging the Wheel Speed Sensor connector from both sides of the sensor and plate before removing the brake rotor at the back. Take out the wheel drive shaft retaining nut for disposal and disconnect the upper Control Arm to knuckle retaining nut while using (J 43631) to separate the upper Control Arm from the knuckle. Avoid damaging the outer constant velocity boot seal as you perform this task. Use the specified tool named snap-on - cj129 universal hub puller, otc - 7394 universal hub puller, or (J 45859) to connect with the Wheel Bearing/hub. Move the wheel drive shaft to separate from the Wheel Bearing/hub. Then remove the Wheel Bearing/hub unit. Use the proper fastening methods and put the updated Wheel Bearing/hub unit on the vehicle. After that, tighten the retaining bolts to 125 nm (92 lb ft). Reinstall the upper Control Arm on the knuckle before installing a new wheel drive shaft retaining nut. Tighten it to 160 nm (118 lb ft) and put back the brake rotor afterward. Reconnect the Wheel Speed Sensor electrical connection to both parts and put the tire and wheel back. Lower the vehicle afterward.
Related 2009 Cadillac SRX Parts
2009 Cadillac SRX Shock Absorber
2009 Cadillac SRX Coil Springs
2009 Cadillac SRX Control Arm
2009 Cadillac SRX Control Arm Bracket
2009 Cadillac SRX Lateral Arm
2009 Cadillac SRX Lateral Link
2009 Cadillac SRX Ride Height Sensor
2009 Cadillac SRX Sway Bar Bracket
2009 Cadillac SRX Sway Bar Bushing
2009 Cadillac SRX Sway Bar Kit
2009 Cadillac SRX Sway Bar Link
2009 Cadillac SRX Trailing Arm