How to replace the trailing arm on 2009 Cadillac SRX?

First, lift and support the vehicle to replace the Trailing Arm. Once removed, take off the tire and wheel, then disconnect the automatic level control link from the upper Control Arm. Then, unbolt the brake pipe bracket retaining nuts and bracket from mounting studs. Lift the lower Control Arm with use of a suitable jack and remove the trailing link to knuckle nut and bolt. With the jack removed, support the frame with an appropriate jack, and take out the front bolts in the frame in order to drop the front of the rear frame. Remove the trailing link to frame nut and bolt, then replace the trail link from the vehicle. For installation, start by fitting the trailing link to the vehicle loosely, followed by the fitting of the trailing link to frame bolt and nut. Lift the frame using an appropriate jack and follow fastener caution guidelines. Mount the front bolts to the frame and tighten them up to 265 nm (195 lb ft) and then remove the jack. Crank up on a suitable jack to hold the lower Control Arm to align the trailing link, knuckle, then install the link to knuckle bolt and nut. Tighten trials linking to frame nut to 150n m (111 lb ft) and trails linking to nuckle mounting bolt to 170 nm(125 lb ft). Replace the brake pipe bracket onto the mounting studs as well as tighten the retaining nuts to 10 nm (89 lb in), and finally connect the automatic level control link up to the upper Control Arm. Lastly, install the tire and wheel back and before reducing the vehicle.

OEM 2009 Cadillac SRX Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Trailing Arms found

View related parts
2009 Cadillac SRX Upper Control Arm, Rear Driver Side
Part Number: 15267619
$128.23 MSRP: $199.96
You Save: $71.73 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Driver Side
- Replaces: 25766117
- Item Weight: 9.40 Pounds
- Item Dimensions: 5.6 x 19.2 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15267619
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Upper Control Arm, Rear Passenger Side
Part Number: 15267620
$124.73 MSRP: $198.03
You Save: $73.30 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Passenger Side
- Replaces: 25766118
- Item Weight: 8.90 Pounds
- Item Dimensions: 4.5 x 16.9 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15267620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Lower Control Arm, Rear Passenger Side
Part Number: 25768321
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Passenger Side
- Item Weight: 3.70 Pounds
- Item Dimensions: 21.3 x 10.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Trailing Arm, Rear Driver Side
Part Number: 25716358
Product Specifications
- Other Name: Arm, Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear Driver Side
- Item Weight: 5.00 Pounds
- Item Dimensions: 24.6 x 2.9 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25716358
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Trailing Arm, Rear Passenger Side
Part Number: 25721399
Product Specifications
- Other Name: Arm, Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Item Weight: 4.80 Pounds
- Item Dimensions: 23.9 x 2.8 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25721399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Lower Control Arm, Rear Driver Side
Part Number: 25768320
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Driver Side
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac SRX Trailing Arm

With a comprehensive array of OEM 2009 Cadillac SRX Trailing Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Trailing Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the trailing arm on 2009 Cadillac SRX?
A: First, lift and support the vehicle to replace the Trailing Arm. Once removed, take off the tire and wheel, then disconnect the automatic level control link from the upper Control Arm. Then, unbolt the brake pipe bracket retaining nuts and bracket from mounting studs. Lift the lower Control Arm with use of a suitable jack and remove the trailing link to knuckle nut and bolt. With the jack removed, support the frame with an appropriate jack, and take out the front bolts in the frame in order to drop the front of the rear frame. Remove the trailing link to frame nut and bolt, then replace the trail link from the vehicle. For installation, start by fitting the trailing link to the vehicle loosely, followed by the fitting of the trailing link to frame bolt and nut. Lift the frame using an appropriate jack and follow fastener caution guidelines. Mount the front bolts to the frame and tighten them up to 265 nm (195 lb ft) and then remove the jack. Crank up on a suitable jack to hold the lower Control Arm to align the trailing link, knuckle, then install the link to knuckle bolt and nut. Tighten trials linking to frame nut to 150n m (111 lb ft) and trails linking to nuckle mounting bolt to 170 nm(125 lb ft). Replace the brake pipe bracket onto the mounting studs as well as tighten the retaining nuts to 10 nm (89 lb in), and finally connect the automatic level control link up to the upper Control Arm. Lastly, install the tire and wheel back and before reducing the vehicle.